Top hinges lid for 2024

Finding your suitable hinges lid is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best hinges lid including detail information and customer reviews. Let’s find out which is your favorite one.

Best hinges lid

Related posts:

Best hinges lid reviews

1. Douper Lid Stay Tension Adjustable Lid Support Hinge for Top-Upward Opening Kitchen Cabinets Maximum Bearing Capacity 40lbs/2pcs

Feature

RANDOM STAYAdjust the lid opening angle, and keep it stay in place at different angles without time limit. It will not slam shut when the lid stays open
CONDITIONED SOFT CLOSINGOnly with this hinge supporting less than 40lbs and keeping two hinges in same tension by your adjustment will soft closing function work perfectly. It will go down slowly, and protect your fingers from being crunched
ADJUSTABLE TENSION--Adjust tension with Allen wrench to fit for lids with different weight. After installing the hinge, please tighten the mechanism into Allen wrench hole to prevent lid from slamming shut
EASY TO INSTALLOur lid stay allows you to keep it installed for 75, 90, and 110 opening. The hinge is used for side-mounting and top-mounting. Mark two points for drilling holes, and screw each mounting bracket into its respective place. Come with installing screws and Allen wrench
SUPPORT MAX 40LB/2PCSMade of durable and sturdy Zinc alloy in Satin Nickel, it is designed for supporting the lid weighing less than 40lb, such as ones of toy chamber, cabinet, cupboard and window seat, and wardrobe.

2. Apexstone Soft Close Toy Box Hinges Soft Close Toy Chest Hinges Slow Closing Hinges for Toy Chest Toy Box Safety Hinge Soft Close Hinge, Set of 2

Feature

Lids lower gently,Ideal for SOFT CLOSING lid to prevent from slamming so that it won't smash kid's fingers
Length (Center-to-Center): 8.7 Inch(220 mm),Extended Length (Center-to-Center):14.2 Inch(360 mm)
SOFT DOWN the door/lid which the SIDE LENGTH is Less than 30 Inch, the WEIGHT is Less than 30 Lbs
As the Installation,the measurements are 3 1/2 Inch /90 mm from the back of the lid, 7 5/8 Inch/195 mm from the back of the cabinet, and 8 5/8 inch/220 mm from the bottom of the cabinet. While if unfortunately you feel it's too weak,you can move the mounting point on the lid 20 mm(0.79 inch) towards the opposite direction of the hinges, OR you can move it on the cabinet 20 mm(0.79 inch) towards the back of the cabinet
We offer 1 YEAR 100% SATISFACTORY WARRANTY, if unfortunately our SOFT DOWN LID GAS STRUT did not work well ,please kindly contact us for exchange, refund or return

3. RUYUFE Lid Support Hinge Lid Stay with Soft Close Toy Box Hinge Support Drop Lids of Cabinets Kitchen Support 40lb/2pcs

Feature

DURABLE LID SUPPORT HINGE--Made of Zinc ally in Satin Nickel, Lid support can be mounted for flap support or bar counter function.
SOFT CLOSE STAY---Every Lid support can be adjusted in largest 7590 and 100 and used for Right or Left Hand mounting
MAX WEIGHT OF LID STAY--40lbs when use 2 pcs lid stays, Lid support hinge can be mounted on the left or right side.
WIDE USAGE--Perfect as toy box hinges, Lid stay support good for kitchen cabinet door cupboard and window seat, wardrobe.
EASY TO INSTALL LID HINGE --The lid hinge is used for side mounting and top mounting. Only mark two points for drilling holes, and screw each mounting bracket into its respective place. Installing screws and Allen wrench in package.

4. RUYUFE Lid Stay 105 Degree Open with Soft Close, Lid Support for Toy Box and Upward Top-Opening Flap Doors, Easy to Install

Feature

STURDY LID STAY WITH SOFT CLOSE-- The Lid stay hinge is made of nickel plated steel and plastic, and per lid-stay support the range of door weight 6-10 lbs, Height 18-19 inch.
LID STAY SLOW CLOSING -- Lid stay support built-in hydraulic dampening device. Doors and lids will come down slowly and softly which eliminates slamming doors or smashed fingers.
KEEP LID HINGE STAY OPENING, WIDE USAGE -- Never worry again about having to prop the lid open. This lid support will hold the lid open until you are ready to close. This lid stay is deal for upward opening flaps, such as toy boxes and vanity lids, vertical cabinet doors and storage box, cabinetry, piano or butt hinges.
COMPACT DESIGN OF LID STAY HINGE -- The compact design allows for installation in tight fit areas. The lid hinges supports opening the lid at a maximum Angle of 105 degree.
EASY TO INSTALL LID SUPPORT-- Updated manual can be downloaded in Amazon page.Easy to follow installation instructions ensure a perfect install the first time! Lid stay can be installed on the left or on the right.

5. VOCOMO Lid Stay 105 Degree Open with Soft Close, Lid Support Hinge for Toy Box, Easy Install

Feature

GENTLE SLOW CLOSE DESIGN - Lids will lower slowly and gently to avoid crushing even the smallest of fingers.
HOLDS LID OPEN - Never worry again about having to prop the lid open. This lid stay will hold the lid open until you are ready to close.
SMALL COMPACT DESIGN - The compact design allows for installation in tight fit areas.
EASY INSTALL INSTRUCTIONS - Easy to follow installation instructions ensure a perfect install the first time!
LIFETIME WARRANTY - We provide worry-free lifetime warranty(no man-made)and friendly customer service.

6. Lid Stay Hinge Soft Close Safety Lid Support Toy Box Hinge 25-50lb for Toy Box Kitchen Cabinet Wardrobe of Top-Upward Opening & Top Flap Doors

Feature

LID STAY HINGE-- Soft close hinges will keep your lid open until you push hinge down. Keep the lid stay in place at different angles when the opening angle is larger than 70. Lid support hinge is suitable for doors of cabinet, toy box, kitchen, wardrobe, storage chest cupboard and so on.
SOFT CLOSE SAFETY HINGE -- Excellent safety solution for heavy hinged lids, lids will lower slowly and gently to avoid smashing fingers. Lid will slow the descent when the opening angle is less than 70.
WEIGHT CAPACITY 70N-120N Lid support hold 10lbs-18lbs/1pc. 2 hinges support 20lbs-36lbs/ 2pcs.
HEAVY DUTY HINGE MATERIAL--Lid Support Hinge is made of zinc alloy, multi-layer electroplating solid process casting, fine workmanship. corrosion resistance and anti-rust durable and practical.
EASY TO INSTALLEach lid hinge can be used for right or left hand mounting, easy to install by following the placement measurements on the instructions.

7. Gas Spring, Gas Strut, Gas Shocks, Soft Close Hinges, Toy Box Hinges, Lift Supports, Lid Support, Kitchen Cabinet Hinges Hydraulic Support Door Cabinet Hinge Spring, Pressure:120N/26lb/12KG[2 Pack]

Feature

Since the gas struts need to be installed by themselves, you should consider whether you can install them independently. It is recommended: one for cabinet door width <600mm/23.6in, and two for cabinet door width >600mm/23.6in to achieve parallel opening and closing synchronization. , Choose the model and quantity according to the weight of the actual cabinet door panel. The choice is not soft and hard, and the small one cannot hold the cabinet door, 10N=2.2ib=1KG.
Stable & No Rusty: gas struts is made of copper core with zinc plating, which prevents from rusting even aftering using for a few years.If there is a problem with the product or installation difficulties, please contact customer service as soon as possible to send installation pictures or videos, thank you.Brand: WANLIAN
Install the nail plate and insert the ball into the plastic hole. You can remove the metal clip with a screwdriver or a screw when you need not to use.*It is suit for heavier kitchen cabinet, bedroom trunks, toy box or storage box under window bench seat as well as folding table for RV.Brand: WANLIAN
Pressure:120N/26lb/12KG (Per Strut);Length ( hole center to hole center) :9-11/16'';Travel:3-14/25'' ,Distance between ball mounts compressed: 6-1/8". 120N Gas Shocks suit best for the door weight 100N-120NThe door panel weighs more than 26lb, 12KG, it is not suitable for use. It will not be able to be supported, so use two or higher pressure models.Brand: WANLIAN
1.The gas spring piston rod must be installed in the downward position, not upside-down, which can reduce friction and ensure the best damping quality and cushioning performance. 2.The gas spring piston rod is strictly prohibited from rotating to the left. If you need to adjust the direction of the joint, you can only turn it to the right. (Avoid the loss of gas in the cavity) 3.The connection point should be installed flexibly without jamming.

8. Heavy Duty Lid Stay Hinges QBOSO Folding Lid Support Hinge,Perfect for Cabinet,Closet ,Wardrobe or Toybox 110 Degree ( Heavy Duty Style 1 Pair)

Feature

These support hinges are well made and designed to support the lids of box, such as mini toy box, cabinet,closet,wardrobe lids, the enhanced version has the advantages of strong bearing capacity.
Adjustable for different weights - With the Allen wrench included in the package, the support hinges are fully adjustable for different weight by turning the screw in the middle of the arms to set up appropriate pressure so that the lid can be slided down gently without smashing fingers.
Material - Made of premium quality zinc alloy with maximum corrosion resistance and durability the lid stay hinges guarantee high performance: Max-weight 35 lbs when use 2 pcsup to 17.5lbs - 1 Lid Stay
Perfect for any lids or flaps when a soft closing motion is required ,each lid stay can be used for right or left hand mounting,holds the door at any angle you want,upward door open adjustable angle of 75,90,110,self adjust,
Package - 2 pcs lid stays,Allen wrench and exclusive redesign Installation instruction are included

9. HOWDIA 200N/44lbs Safety Lift Support, Gas Struts Soft Open Lid Hinge for Cabinet Toy Box, Pack of 2

Feature

Pressure: 200 N/44 lbs (each hinge); 2pcs total 88lbs,Travel: 3-14/25; Distance Between Ball Mounts Compressed: 8-7/10''. Do not exceed the maximum load bearing capacity of the product
Use: Designed for support on cabinets toy box with heavy door, keeping the lid soft up, detail depands on door wright, if use for light door, maybe will hard to close
Ideal Choose: Perfect Lid support for supporting the lid to keep it soft open, when you close it, need push door until it close
Package Included: 2 x Gas Struts and 10 x Screws, good choice for various box/toy chest/toy box/tool box/car to prevent from smashing hands
Service: If there is any quality problem, we will promise return customers refund or ship a new one, email will be reply within 24hours

10. VIPMOON 2 Pack Lid Support Hinge in Satin Nickel Lid Stay with Soft Close Toy Box Hinge Support Drop Lids of Cabinets Cupboard Wardrobe Max Weight Support 40lb/2pcs

Feature

Easy To Install: Our lid stay allows you to keep it installed for 75, 90, and 110 opening. The hinge is used for side-mounting and top-mounting. Mark two points for drilling holes, and screw each mounting bracket into its respective place. Come with installing screws and Allen wrench
SUPPORT MAX 40LB/2PC: Made of durable and sturdy Zinc alloy in Satin Nickel, it is designed for supporting the lid weighing less than 40lb, such as ones of toy chamber, cabinet, cupboard and window seat, and wardrobe.
RANDOM STA: Adjust the lid opening angle, and keep it stay in place at different angles without time limit. It will not slam shut when the lid stays open
CONDITIONED SOFT CLOSING: Only with this hinge supporting less than 40lbs and keeping two hinges in same tension by your adjustment will soft closing function work perfectly. It will go down slowly, and protect your fingers from being crunched
ADJUSTABLE TENSION: Adjust tension with Allen wrench to fit for lids with different weight. After installing the hinge, please tighten the mechanism into Allen wrench hole to prevent lid from slamming shut

Conclusion

All above are our suggestions for hinges lid. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using hinges lid with us by comment in this post. Thank you!