10 best 250k potentiometer cts for 2024

It took days of going through more than a thousand customer reviews and conducting expert researches to narrow down the list. Weve included a comparison table below to give you a quick summary of our top 10 250k potentiometer cts. Its followed by an in-depth review of each 250k potentiometer cts. Hopefully, once you are done reading this article, you will be well informed about 250k potentiometer cts and be able to select the right 250k potentiometer cts for you without any hesitations.

Best 250k potentiometer cts

Related posts:

Best 250k potentiometer cts reviews

1. Fender Original 250k Splitshaft Potentiometer, Volume or Tone

Feature

Fender original factory part
250K split shaft
Includes nut, washer, and tonecapacitor
For use as a volume or tone control on single coil pickups

2. CTS 250K Short Split Shaft Audio Pots - 450G Series - Lot of 3 (3X) + .022uf Orange Drop cap for Fender Strat

Feature

250K ohm, Short (1/4" bushing height) Split Shaft Audio Taper, 10% Tolerance
450G Series with Solid Brass Bushing & Shaft
Low Friction Rotation
Includes Cornell Dubilier .022uf Orange Drop Capacitor
For U.S. Spec Guitars only. Not for use in import guitars with metric components

3. CTS 250K Short Shaft Audio Pots Lot of 3 (3X) 450G Series w/Orange Drop .047uF Cap

Feature

CTS 450G series, 250K, short (1/4" bushing) shaft, audio taper, 10% Tolerance
Low Friction Rotation
For through pick guard and control plate mounts
Cornell Dubilier .047uF Orange Drop Capacitor
3/8" bushing diameter not suitable for import guitars

4. CTS 250K Short SOLID Shaft Audio Potentiometer/Pot - 450G Series - PAIR (2X)

Feature

CTS 450G Series Made Specifically for Guitars - Solid Brass Bushing and Shaft
250K Ohm Resistance, 10% Tolerance, Low Friction Rotation
Short Shaft (1/4 Inch Bushing Height), 1/4 Inch Diameter Solid Shaft
Each pot comes with hardware - 1X Nut, 1X Dress washer and 1X Lock Washer
Imperial Sized - NOT for import guitars using metric components

5. Bourns 250K SHORT Shaft Audio Potentiometers - Set of Three (3X)

Feature

250K Ohm Split Shaft Audio Taper Pots - Short Shaft (3/8" bushing).
Low Friction Rotation (This means the knob turns easier than a standard rotation model)
18 Tooth Coarse Spline Shaft - Uses 6mm Metric Push On Knobs
Each Pot comes with hardware - 2 X nut and 2 X washer
Please Note! These are not for use with Import Guitars. They also have a slight metal on metal feel to the rotation. This is how they are made. These are NOT long shaft pots. There are two bushing lengths of short shaft pot 1/4" and 3/8". If you are using these in place of a 1/4" bushing pot use the second hex nut as a spacer.

6. CTS 250K Electric Guitar Pots Guitar Linear Potentiometers B250K

Feature

Split shaft with Fine Spline Knurled; Shaft Length:18.5mm; Shaft Diameter: 6mm; Base Diameter: 24mm
It's made in CTS Taiwan Company, we have shown the detailed factory diagram for the pots, please verify the diagram if you have any doubts. CTS has several factories that all of them can produce guitar pots
A' means Audio Taper which increases or decreases in a sloped curve fashion ; 'B' means Linear Taper which increases or decreases in a linear fashion
Generally speaking, Audio Taper (A) are always used as Tone and Linear Taper (B) are always used as Volume, but you can use Audio Taper as Volume and Linear Taper as Tone as well, it usually depends on your personal preference.
Package includes: 1x CTS Pots; Comes with Nut and Washer

7. CTS 250K Balance-Blend Detent Dual Gang Audio Potentiometer

Feature

Genuine AllParts Item

8. CTS 250K Push/Pull Split Shaft Audio DPDT Potentiometer

Feature

Genuine AllParts Item

9. CTS Pot, 250k Audio, Split Shaft (4 Pack)

Feature

Genuine CTS pots, the brand used by nearly every American guitar company for half a century!
250k 10% audio-taper, mimics the logarithmic way humans perceive changes in volume better than any other taper.
24-tooth knurled split-shaft, designed for plastic knobs that push on.
3/8-32 bushing thread is 3/8" diameter, 1/4" long. For mounting to pickguards or control plates.
CTS low torque design (dimpled back) is easy to turn, this is the style used on Strats since the 1950s.

10. CTS 250K Short Split Shaft Audio Taper Potentiometers 450G Series for Electric Guitar - 3 Pack

Feature

250K Short Split Audio Taper Pots - 10% Tolerance - suitable for tone or volume control
1/4" High X 3/8" Diameter Bushing, 24 Tooth Fine Spline Shaft Solid Brass Bushing & Shaft
Low Friction Rotation & Bakelite base plate
CTS 450G Series Made Specifically for Use in Guitars
Imperial Sized - NOT for import guitars using metric components

Conclusion

All above are our suggestions for 250k potentiometer cts. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using 250k potentiometer cts with us by comment in this post. Thank you!