Top 10 zvs driver kit for 2020

What are criterias of the best zvs driver kit? It is not easy to find the answer. We spent many hours to analyst top 10 zvs driver kit and find the best one for you. Let’s find more detail below.

Best zvs driver kit

Related posts:

Best zvs driver kit reviews

1. SainSmart 5V~12V Zero Voltage Switching ZVS Induction Heating Power Supply Module + Coil Power Supply Heating Power Supply Module

Feature

ZVS heating power supply module includes the heating coil.
Input voltage DC5V-12V.
Maximum power 120W.(when 12V eddy-current heating)
Ensure all the components welding right, power line connect in the right way.
The width of the heated object is as far as possible between the 1/3~1/2 of the inner diameter of the heating coil, the maximum width is less than 2/3.

2. Icstation DC 12-30V High Voltage Arc Generator ZVS Flyback Driver Kit for SGTC Marx Generator

3. 1000W 20A ZVS Low Voltage Induction Heating Board Module Tesla with Coil 12V-48V Flyback Driver Heater DIY

Feature

12-48V low voltage power supply. Maximum current 20A, Maximum power 1000W.The bigger voltage, the higher power.
Tested 53V power supply when working properly. It can be used for DIY players to make small parts quenching, annealing and other heat treatment, heating fast, very convenient
This circuit can do induction heating, or replace copper tube with high frequency transformer, it will be a powerful inverter
The higher voltage, the higher current when heating the same things, the effect is better, but at the same time heating is also higher, therefore the choice of input voltage is based on your need.24V or 36V power supply is enough
Note: buyer need to bring their own power and cooling unit

4. Icstation 150W ZVS Low Voltage Induction Heating Module with Brass Coil Flyback Driver Heater

Feature

Zero voltage switching tesla coil flyback driver board with high power output up to 150W
Comes with induction coil designed for induction heating to heat or melt the metal
Working Voltage: DC 5-15V, Board Size: 55 X 37mm/2.17 X 1.46inch(L*W)
On-board blue power indicator, when there is the power, it will light up(if it is dim, means the power is weak)
Make sure that the outer diameter of your object is 1/3-1/2 of the inner diameter of the coil;Only afer connect the coil and load, then you can power on the module, otherwise will damage it
Ship it out by e-packet with tracking information and 7-15 days delivery time usually

5. DC12-30V ZVS Coil Generator Parts High Voltage Power Drive Board Unassembled Set

Feature

HIGHER CAPACITY AND BETTER HEAT DISSIPATION:High quality 1.6mm double circuit board, extra tin for power wire and optimize the wire size of MOS tube driving circuit with a higher current-carrying capacity and better heat dissipation.
BETTER PERFORMANCE: Two original IRFP260N mosfets ensure large current, small internal resistance, high power and better performance.
1.2MM COPPER WIRE: Professional factory custom large inductor, fine workman ship and stable performance, could connect to 15A current for longer time.
HIGHER PRECISION: Employ 1% accuracy 3W metal film resistor with less error, higher precision, small temperature drift and good heat dissipation performance.
BIG THICK HEAT SINK: better heat dissipation effect, greatly improve the stability and extend the service life.

6. Fosa 1800W Induction Heating Module ZVS Low Voltage 12V-48V Induction Heating Board Flyback Driver Heater DIY High Frequency Induction Heating Machine Module

Feature

This product has a maximum power of 1800W, super PCB layout design and super heat sink, superior heat dissipation effect
12-48V low voltage DC power supply with a maximum current of 40A. It can work continuously for several hours with good heat dissipation
Can use graphite crucible to melt gold, silver, copper, aluminum and other metals, heating evenly, fast and very convenient
With a cooling fan interface, can also do Tesla discharge, generator voltage inverter, etc
It is recommended not to exceed 48V 35A to prevent accidents and damage

7. 1800W ZVS Induction Heating Board Module Low Voltage High Frequency 12-48V Flyback Driver Heater with Tesla Coil and Cooling Fan

Feature

The induction heating boards maximum power is 1800W, adopted super PCB layout design and super heat sink, heat dissipation good, since with a cooling fan interface, can also do Tesla discharge, generator voltage inverter, etc
The induction heating circuit adopt 12-48V DC power supply, maximum current is 40A, the power uo to 1800W. It can work continuously under the condition of good heat dissipation. moderate power which make it can be used to quenching, annealing and other heat treatment. also for melted with graphite crucible kim/silver/ copper/aluminum and so on, heating is evenly and fast
it is recommended that not exceed 48V 35A to prevent accidents and damage,Although withstand more than 40A current.Induction heating is recommended to use 36V 20A power supply, 12V power supply is too small almost without response, and 12V power might lead to the voltage decreases, which is very dangerous.More than 24V/20A power supply, the greater the voltage/current, the greater the heating power, heating faster.
please check the power output meets the requirements if the MOS tube fever,and be sure to do a good job of cooling.Do not empty the board, otherwise it will create a very high noise, then MOS tube will burn out
please do not to heat too large metal, otherwise it may be overloaded, please add a 35A fuse or ammeter and air switch for better use (not included).

8. ANMBEST High Frequency ZVS Driver Module 5V-12V 120W Low Voltage Induction Heating Power Supply Board with Heating Coil

Feature

Operating voltage: 5V-12V. Maximum power: 120W. Push the ignition coil primary 5 + 5 turn, about 30 w.
HEATING COIL: The width of the object to be heated should be between 1/3 and 1/2 of the inner diameter of the heating coil, and the maximum should not exceed 2/3! The diameter of the heating object should be controlled within 20mm as much as possible.
OPERATING TIME: When induction heating, it is usually 5 minutes to power off and cool down. For long-term use, it is recommended to use a copper tube as the coil and cool it with water.
LED INDICATION: With blue LED power indicator, easily confirm whether the device is powered on.
ATTENTION: Confirm that all components are soldered correctly, and that the positive and negative poles of the power cord are not reversed. Connect the load (heating coil, ignitioncoil), and then turn on the power! Do not power on without load!

9. LoveinDIY 20KV ZVS Tesla Coil Booster Driver Board DIY Kit High Voltage Generator

Feature

It can be used as a new member for home audio player. by yourself and enjoy the great music.
Good tone quality, suitability to any kind of music and convenient usage.
You need to DIY assemble it by yourself, enjoy the fun at the same time.
High quality PCB board, high reliability, including driver board DIY kit, ignition coil and spray point.
Plasma Speaker DIY Kit features good tone quality, suitability to any kind of music and convenient usage.

10. VIEUR Marx Generator Tesla Arc Pulse Generator Lightning DIY Kit for ZVS Flyback Driver Board/Ignition Coil,6

Feature

Withstand voltage 30KV2000pf capacitor
The capacitor has high voltage resistance, large capacity and is not easy to break down
Sturdy arc
Adopt 10Q high voltage glass glaze resistance
Interesting science DIY kit

Conclusion

By our suggestions above, we hope that you can found the best zvs driver kit for you. Please don't forget to share your experience by comment in this post. Thank you!