Best ttgo t-beam v1.0 esp32 lora for 2021

What are criterias of the best ttgo t-beam v1.0 esp32 lora? It is not easy to find the answer. We spent many hours to analyst top 10 ttgo t-beam v1.0 esp32 lora and find the best one for you. Let’s find more detail below.

Best ttgo t-beam v1.0 esp32 lora

Related posts:

Best ttgo t-beam v1.0 esp32 lora reviews

1. HiLetgo ESP-WROOM-32 ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA for Arduino IDE

Feature

2.4GHz Dual Mode WiFi + Bluetooth Development Board
Ultra-Low power consumption, works perfectly with the Arduino IDE
Support LWIP protocol, Freertos
SupportThree Modes: AP, STA, and AP+STA
ESP32 is a safe, reliable, and scalable to a variety of applications

2. HiLetgo ESP32 OLED WiFi Kit ESP-32 0.96 Inch Blue OLED Display WiFi+Bluetooth CP2012 Internet Development Board for Arduino ESP8266 NodeMCU

Feature

ESP32 WIFI Kit for Arduino ESP8266 NodeMCU
Driver Library - u8g2: https://github.com/olikraus/u8g2
Instructable for Internet Time: https://www.instructables.com/id/WiFi-Kit-32-NTP-Clock/; Install guide and bunches of info: https://github.com/Heltec-Aaron-Lee/WiFi_Kit_series
English documentation: https://robotzero.one/heltec-wifi-kit-32/; https://github.com/Heltec-Aaron-Lee/WiFi_Kit_series
Operating voltage: 3.3V to 7V; Supports Sniffer, Station, softAP and Wi-Fi Direct modes

3. DIYmall LoRa32u4 LORA RA-02 Module Development Board Long Range Communication 1KM LiPo Atmega32U4 SX1278 for Arduino(Pack of 2 Sets)

Feature

Document link https://github.com/BSFrance/BSFrance-avr
Ideal for creating long range wireless networks that can exceed 2.4 GHz 802.15.4 and similar, it is more flexible than Bluetooth LE, does not require high power unlike WiFi and offers long range.
The RA02 LoRa module is fitted with an U.FL (IPX) external antenna connector.
This board is also equipped with a LiPo and Liion charging circuit and a standard battery interface. It is fully compatible with Arduino. A white user led is tied to pin 13. An orange LED is used for charging status.
What You Get:2 X LoRa32U 2 X IPEX Cable.

4. MakerFocus ESP32 Development Board Upgraded Version 8MB Flash, ESP32 WiFi Bluetooth, ESP32 OLED 0.96 Inch OLED Display CP2102 Internet for Arduino ESP8266 NodeMCU

Feature

[Full documentation]: https://drive.google.com/file/d/1_P9HP9dKquaM_gGJa4mBdF9D2Kwx_v6s/view?usp=sharing; [Note]: This ESP32 development board comes unassembled, soldering of headers is required!! It can lithium battery powered, the lithium battery is not included, battery may be purchased here: https://www.amazon.com/dp/B07CXNQ3ZR
Add battery power detection circuit. Use ADC2_4 (GPIO 13) to read battery voltage. Please refer to this example: https://github.com/HelTecAutomation/Heltec_ESP32/blob/master/examples/ESP32/ADC_Read_Voltage/Battery_power/Battery_power.ino
[This is an upgraded version WiFi Kit 32! ] What's the Upgrade of New WiFi Kit 32? 1. 4MB (32M-bits) FLASH upgrade to 8MB (64M-bits) FLASH; 2. Better 2.4GHz antenna design and impendence matching; 3. Basic low power design (800uA in deep sleep); 4. Add battery power detection circuit. Use ADC2_4 (GPIO 13) to read battery voltage. Please refer to this example: https://github.com/HelTecAutomation/Heltec_ESP32/blob/master/examples/ESP32/ADC_Read_Voltage/Battery_power/Battery_power.ino
5. Add Vext power output pin, users can use this pin to drive some external device (sensor, motor etc.), when system need into deep sleep mode, Vext can be turn off. This pin was controlled by GPIO21, for example: Turn ON: digitalWrite(21, LOW); Turn OFF: digitalWrite(21, HIGH)
6. New WiFi Kit 32 pinout diagram: https://github.com/Heltec-Aaron-Lee/WiFi_Kit_series/blob/master/PinoutDiagram/WIFI_Kit_32(New).pdf; 7. New WiFi Kit 32 schematic diagram: https://github.com/Heltec-Aaron-Lee/WiFi_Kit_series/blob/master/SchematicDiagram/New_WIFI_Kit_32_Schematic_diagram.pdf; 8. Circuit optimization, system more stable; 9. Better power manage system design

5. MakerFocus ESP32 Development Board WiFi Bluetooth LoRa Dual Core 240MHz CP2102 with 0.96inch OLED Display and 433/470MHz Antenna Upgrade Version for Arduino

Feature

Note: This item comes unassembled, soldering of headers is required. Lithium battery is not included, battery may be purchased here: https://www.amazon.com/dp/B07CXNQ3ZR; Link to download English documentation and pinout diagram: https://www.adrive.com/public/drzr3P/datasheet%20F000905.rar, https://github.com/Heltec-Aaron-Lee/WiFi_Kit_series
Upgrade ESP32 LoRa development board with 433/470MHz antenna, full support for the LoRaWAN protocol, it with better features: Perfect impendence matching; Low power design; Fixed all known bugs; More stable; Flash size: 8Mbyte; Others: Optimized impedance matching, Optimized circuit design, Optimized charging indicator, Enhance device stability
It supports Sniffer, Station, softAP and Wi-Fi Direct modes. This product is based on the WIFI Kit 32 added SX1278 chip, that is, LoRa remote modem, 433MHz frequency, about -139dBm high sensitivity, +20 dBm power output
High reliability, transmission distance (measured open area communication distance 3.6Km). Receiver sensitivity up to - 139 dBm,UDP continues to throughput by 135 Mbps; ESP32 oled display, 0.96-inch blue OLED display, lithium battery charging circuit and interface, CP2102 USB to serial chip
We Have a Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click MakerFocus and click Ask a question to email us! Looking forward to your consultation!

6. MELIFE 2 Pack ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with ESP32s Antenna RF AMP Filter AP STA for Arduino IDE

Feature

2 PACK 2.4GHz Dual Mode WiFi + Bluetooth Development Board
Ultra-Low power consumption, works perfectly with the Arduino IDE
Support LWIP protocol, Freertos
SupportThree Modes: AP, STA, and AP+STA
ESP32 is a safe, reliable, and scalable to a variety of applications

7. MakerFocus ESP32 Development Board Support LoRa WiFi Bluetooth BLE Arduino, ESP32 SX1276 LoRaWAN 32M-Bits Flash 30uA Deep Sleep with 868/915MHZ Antenna for Intelligent Scene

Feature

Instruction Manual: http://www.heltec.cn/support-download/?lang=en; https: //github.com/Heltec-Aaron-Lee/WiFi_Kit_series/issues; https://docs.heltec.cn//en/user_manual/how_to_install_esp32_Arduino; PLS NOTE: Battery is not included!!
Support Arduino IDE: You can program products through a complete library and a simple development language to quickly complete solution validation and product development.Three wireless communication protocols: The main chip of this development board is esp32. It supports WIFI, BLE4.2 and lora wireless communication funciton.
Product Description: ESP32 Arduino wireless stick lite is an IoT suite that fully supports the standard LoRaWAN protocol. (Exclusive) Supports the Arduino version of the ESP32 + LoRaWAN protocol routine provided by Heltec. This is a standard LoRaWAN protocol that can communicate with any gateway/base station running the LoRaWAN protocol (requires serial number activation, only the development of the company) The board is available, the serial number can be queried on this page);
Strong Anti-jamming: The esp32 development board has been installed a shield, which can greately improve the Anti-interference ability of this product; Upgrade Version, Smaller Size and Energy Efficient: It has been combined the advantages of traditional wireless modules, which makes it smaller and consume less energy.
Suitable for Various Intelligent Scenes: It can not only be used as a gateway for IoT products but also be used as a drive terminal product, such as Intelligent Cars, Intelligent Lamps, Robot Control, Equipment Monitoring, Inviroment Detection and Drone Control.

8. DORHEA 3PCS ESP32 Development Board ESP-32S Microcontroller Processor Integrated Chip CP2102 WiFi NodeMCU-32S ESP-WROOM-32 for Arduino IDE

Feature

Dual core ESP-32 development board, 2.4GHz Dual Mode Development Board.
Ultra-Low power consumption,small volume, easy to embed to other products, works perfectly with the Arduino IDE.
Support Lua program, easy to develop, support LWIP protocol, Freertos, three modes : AP, STA and AP + STA.
ESP32 is a safe, reliable, and scalable to a variety of applications,the user can cut off the power of the CPU and use the low-power coprocessor to continuously monitor the status of the peripherals or whether some of the analog values exceed the threshold.
Development board aplication : https://github.com/Nicholas3388/LuaNode

9. DORHEA 4PCS ESP32 Development Board ESP-32S Microcontroller Processor Integrated Chip CP2102 WiFi NodeMCU-32S ESP-WROOM-32 Compatible with Arduino IDE

Feature

Dual core ESP-32 development board, 2.4GHz Dual Mode Development Board.
Ultra-Low power consumption,small volume, easy to embed to other products, works perfectly compatible with the Arduino IDE.
ESP32 development board support lua program, easy to develop, support LWIP protocol, Freertos, three modes : AP, STA and AP + STA.
ESP32 is a safe, reliable, and scalable to a variety of applications,the user can cut off the power of the CPU and use the low-power coprocessor to continuously monitor the status of the peripherals or whether some of the analog values exceed the threshold.
Development board aplication : https://github.com/Nicholas3388/LuaNode

10. D-FLIFE 3pcs ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi Bluetooth Dual Cores Microcontroller Processor Integrated with ESP32s Antenna RF AMP Filter AP STA for Arduino IDE

Feature

2 PACK 2.4GHz Dual Mode WiFi + Bluetooth Development Board
Ultra-Low power consumption, works perfectly with the Arduino IDE
Support Three Modes: AP, STA, and AP STA
ESP32 is a safe, reliable, and scalable to a variety of applications
Bluetooth Dual Cores Microcontroller Processor Integrated with ESP32s Antenna RF AMP Filter AP STA

Conclusion

By our suggestions above, we hope that you can found the best ttgo t-beam v1.0 esp32 lora for you. Please don't forget to share your experience by comment in this post. Thank you!