Best tmc2130 bigtreetech for 2020

There are many reasons you might choose to buy tmc2130 bigtreetech but it is not easy to find the best suitable tmc2130 bigtreetech for you. But don’t worry! We did some of the work for you already by researching a few models on the current market. Let’s check following article to find the best tmc2130 bigtreetech.

Best tmc2130 bigtreetech

Related posts:

Best tmc2130 bigtreetech reviews

1. BCZAMD 3D Printer Motherboard Parts TMC2130 V1.1 SPI Stepper StepStick Motor Mute Driver with Heat Sink Ultra-Silent for 3D Printer Control Board - Pack of 5

Feature

TMC2130 V1.1 Only support SPI. High-precision sensorless motor load detection.
Upgrade Stepper Motor Stick: TMC2130 driver is widely used in 3D printers and small CNC machines, lower heat; can replace A4988 DRV8825 LV8729 stepper driver.
Two-phase stepping motor single-phase current 1.2A (peak value is 2.5A), motor operating current can be adjusted.
Noise-free operation combined with maximum efficiency and optimum motor torque.
After-sales guarantee: each defective item can be replacement for free or refund. If any question, please feel free to contact or QA us, we will try our best to service you.

2. KINGPRINT TMC2130 V3.0 Stepper Motor StepStick Mute Silent Driver with Heatsink for 3D Printer Control Board 4 Packs(SPI)

Feature

The chip is facing down, the pure gold process, and the heat dissipation function is strengthened.
Highlights: TMC2130 V3.0 is a new module that has been optimized .
Working Performance: The use of sequexternal sequencer can greatly reduce the working load of the chip, effectively avoiding the errors caused by the chip overload, the missing step and the trouble.
Compatible: MKS Gen V1.4/mks Gen L v1.0/ramps 1.6/SKR V1.3 and so on.
Note: This module is similar to TMC2100, which produces a lot of thermal energy at work.Therefore, in the use of the process, it is necessary to increase the radiator and cooling fan to cool, reduce the loss of the steps and operating deviations.

3. BIGTREETECH 3D Printer Part Stepstick Mute TMC2130 V3.0 Stepper Motor Driver with Heat Sink for SKR V1.3 Ramps 1.6 1.5 MKS GEN L Control Board (SPI Mode)

Feature

Excellent Heat dissipation
stealthChop can driver the motor to work under extreme silence
spreadCycle:The motor controlled by the PWM chopper mode operated more smoothly and avoid losing steps and Jittering
Adopt Gold Finish process for better antioxidant

4. KINGPRINT TMC2130 V3.0 SPI with SKR V1.3 32bit Smoothieware Controller Panel Board for 3D Printer Compatible With12864LCD/Support A4988/8825/TMC2208/TMC2100 Drivers

Feature

1.The performance of the ARM-class Cortex-M3 series LPC1768 main control chip with 32-bit frequency and 100MHz is greatly improved;Reserve the extended port SERVOS of the PWM signal to support BL Touch
2.Support Resume Printing While Power Off,Filament Break,CE Certification to adopt 4-Layer PCB with Gold deposition technology which capability is more stable and better heat dissipation
3..Onboard TMC2130 driven SPI mode of operation and TMC2208 driven UART mode,The utility model eliminates the complicated wiring process and can be used only by simply plugging and unplugging the jumper cap;
4.The high-performance MOSFET tube has better heat dissipation effect; it supports functions such as power-off continuous shooting, material cut detection, and shutdown;
5.Use the power selection design ,to separate the USB power supply from the switching power supply, effectively avoiding short circuits,Causes the computer's USB port to be burned;

5. WitBot TMC2130 V3.0 SPI/DIR/Step Stepper Motor Driver Step Stick Mute Suit SKR V1.3 MKS GEN L Ramps 1.4 Board for 3D Printer Part.(Pack of 4pcs) (SPI)

Feature

The PCB board using the gold deposition technology has oxidation resistance, good heat dissipation and more stability.
StealthChop for extremely quiet operation and smooth motion.
SpreadCycle highly dynamic motor control chopper.
CoolStep current control for energy savings up to 75%.
Passive Braking and freewheeling mode.

6. BIGTREETECH Direct TMC2130 V3.0 SPI Stepper Motor Driver Silent 3D Printer Parts for SKR V1.3 MKS GEN L Controller Board (4pcs)

Feature

1.BIGTREETECH TMC2130 V3.0 :
Avoid losing steps and jittering, Good heat dissipation With limit switch function, Immersion Gold process, Ultra-quiet

2.Potentiometer
Potentiometer adjustment instructions Clockwise: Decrease Vref Counterclockwise: Increase driver current

3.Heat dissipation
Stealth chop for very quiet operation and smooth movement,
Good heat dissipation Large heat dissipation area, good heat dissipation effect

4.Parameter description
Maximum resolution 256: microsteps per full step
Step / Dir Interface: Microstep interpolation
micro Player SPI interface
stealth Chop : for extremely quiet operation and smooth movement
spread Cycle : Extremely dynamic motor control chopper
cool Step : current management for energy savings of up to 75%
Voltage range: 12V / 24VDC
Passive brake: Freewheel mode
Full protection and diagnostics

5.BIGTREETECH TMC2130 V3.0 Manual https://github.com/bigtreetech/BIGTREETECH-TMC2130-V3.0

7. BIGTREETECH DIRECT SKR V1.3 32Bit CPU Mother Board + TFT35 V2.0 Touch Screen + 5pcs TMC2130 SPI Mode for DIY 3D Printer

Feature

1.SKR V1.3 Motherboard Parameters:
Appearance size: 110*85mm
Mounting size: 102*76mm
Microprocessor: 32 Bit ARM cortex-M3 LPC1768 CPU
Motor driver: support TMC2208, TMC2130, ST820, LV8729, DRV8825, A4988, can be independently external motor drive
Driver working mode support:TMC2130 SPI, TMC2208 UART
Display: TFT28, TFT35, LCD2004, LCD12864
2.TMC2130 V3.0 Parameter description:
Maximum resolution 256: microsteps per full step
Step / Dir Interface: Microstep interpolation
micro Player SPI interface
spread Cycle : Extremely dynamic motor control chopper
cool Step : current management for energy savings of up to 75%
3.SKR V1.3 Usage instructions:
https://github.com/bigtreetech/BIGTREETECH-SKR-V1.3
4.BIGTREETECH TMC2130 V3.0 Manual https://github.com/bigtreetech/BIGTREETECH-TMC2130-V3.0
5.TFT35 V2.0 Usage instructions: :https://drive.google.com/open?id=1wpLWdUFbcoe0QVuDITmIoHrdzI2fYf-H

8. BIGTREETECH TMC2209 V1.2 with SKR V1.3 32bit Smoothieware Controller Panel Board for 3D Printer Compatible With12864LCD/ TFT24 /TFT28/TFT32/TFT35

Feature

SKR V1.3-The performance of the ARM-class Cortex-M3 series LPC1768 main control chip with 32-bit frequency and 100MHz is greatly improved;Reserve the extended port SERVOS of the PWM signal to support BL Touch;
SKR V1.3-Onboard TMC2130 driven SPI mode of operation and TMC2208 driven UART mode,The utility model eliminates the complicated wiring process and can be used only by simply plugging and unplugging the jumper cap;
SKR V1.3-The high-performance MOSFET tube has better heat dissipation effect; it supports functions such as power-off continuous shooting, material cut detection, and shutdown;
TMC2209- The motor is not easy to lose step; ultra-quiet mode;A large area of thermal pad, reduce the temperature of the driving work;
TMC2209-Prevent motor shake;Support stall detection;Support STEP / DIR and UART mode

9. BIGTREETECH SKR V1.4 32bit Controller Panel Board for 3D Printer Compatible With12864LCD/ TFT24 Support 8825/TMC2208/Tmc2130

Feature

1) Using 32-bit 100MHz ARM-class Cortex-M3 series LPC1768 main control chip, the performance is greatly improved;
2) Equipped with highly modular open source firmware Marlin 2.0, which is convenient for users to DIY and secondary development;
3) Support 2.4, 2.8, 3.5-inch color touch screen, support LCD2004 screen, LCD12864 screen; Upgrade configuration firmware through SD card, simple, convenient and efficient operation;
4) On-board TMC-driven SPI working mode and UART working mode, and the on-board DIAG function pins are convenient for customers to use, eliminating the complicated wiring process, which can be used by simply removing and inserting the jumper cap; Functions such as continuous power on, material detection, shutdown after power off
5.BTT SKR V1.4 open source information URL:https://github.com/bigtreetech/BIGTREETECH-SKR-V1.3/tree/master/BTT%20SKR%20V1.4

10. BIGTREETECH SKR V1.4 Turbo 32bit Controller Panel Board for 3D Printer Compatible With12864LCD/ TFT24 Support 8825/TMC2208/Tmc2130 (with 4TMC2208)

Feature

BTT SKR V1.4 open source information URL:https://github.com/bigtreetech/BIGTREETECH-SKR-V1.3/tree/master/BTT%20SKR%20V1.4
TMC2208-The microsteps can be set arbitrarily via firmware (up to 256 actual microsteps).
TMC2208-The actual and interpolated microsteps can be combined to achieve maximum torque.
TMC2208-The firmware can dynamically switch the stepper motor between stealthChop2 and SpreadCycle mode via UART. If the engine is not moving, the engine standby power can be dynamically reduced (via the UART).
SKR V1.4 Turbo Using 32-bit 120MHz ARM-class Cortex-M3 series LPC1769 main control chip, the performance is greatly improved;1-way CNC fan,3-way Frequent fans.

Conclusion

By our suggestions above, we hope that you can found the best tmc2130 bigtreetech for you. Please don't forget to share your experience by comment in this post. Thank you!