Best stm32f103rct6 for 2020

There are many reasons you might choose to buy stm32f103rct6 but it is not easy to find the best suitable stm32f103rct6 for you. But don’t worry! We did some of the work for you already by researching a few models on the current market. Let’s check following article to find the best stm32f103rct6.

Best stm32f103rct6

Related posts:

Best stm32f103rct6 reviews

1. (1PCS) STM32F103RCT6 MCU ARM 32BIT 256KB FLASH 64LQFP 32F103 STM32F103

Feature

Part NO.:STM32F103RCT6
Package:64-LQFP
Description:MCU ARM 32BIT 256KB FLASH 64LQFP

2. Taidacent STM32F103RCT6 Development Board STM32 Core Board Minimum System Programming Microcontroller 256K ROM 48K RAM Type-C Interface

Feature

Main frequency 72M, 256K ROM, 48K RAM
1 reset button, 1 user button, 1 power indicator, 1 user LED, 1 Type-C interface
8M master clock crystal, onboard 32.768Khz RTC crystal
Bring up the SWD and Bring all serial port by pin, reserve the RTC battery holder pad, and bring all 45 free IO ports
High-power 3.3V regulator IC, the maximum external output current is 500ma

3. STM32F103RCT6 LQFP-64 ARM Cortex-m3 32-bit microcontroller MCU IC chip semiconductor,Original Packaging Case, Origin IC (Pack of 25 pcs)

4. Stayhome STM32F103RCT6 ARM STM32 Minimum System Development Board Module for arduino Minimum System Board STM32F103C8T6 Upgrade Version

Feature

STM32F103RCT6 ARM STM32 Minimum System Development Board Module For arduino Minimum System Board STM32F103C8T6 upgrade version
High Quality development board

5. BIGTREETECH 3D Printer Part SKR E3 DIP V1.0 32bit Control Board Marlin Open Source Compatible withRamps1.4/1.5/1.6 Support TMC2208/TMC2130 A4988/8825 Drivers

Feature

Using 32bit main frequency 72MHz ARM level Cortex-M3 series STM32F103RCT6 Microprocessor , the performance has been greatly improved
Support Resume Printing While Power Off,Filament Break Detection,Automatic Shutdown After Printing and other functions
Integrated SPI modes of the TMC2130 and TMC5160 for motherboard and drivers adjusting to become simple
Use firmware to set the way of driving current, avoid manual lying current leads to burn-out drive, convenient, safe and reliable
Supports TFT2.8/3.5-inch touch screen and Ender3 printer original LCD12864 Screen

6. STM32 Development Board Small System Board STM32F103RCT6

Feature

The goods are of good quality.
85% conventional orders will be delivered within 7-18days.Some remote countries will take longer.We provide DHL expedited service. The time limit is 3-7 days. (Excluding preparation time.) If the order amount is more than 150$, we will use the DHL service free of charge.
We offer tens of thousands of electronic accessories and modules. You just need to search for keywords in my store.
If the packages not be delivered on time or the products may not be satisfactory. You just need to send a refund request, we will full refund for you without asking.
We make every effort to provide customers with satisfactory service.

7. BIGTREETECH Direct SKR E3 DIP V1.0 32Bit Control Board with TMC2209 3D Printer Parts TMC2208 TMC2130 SPI VS Cheetah V1.1 SKR Mini for Ender-3 PRO

Feature

1) The board is controlled by a STMicroelectronics ARM Cortex M3 32-bit STM32F103RCT6 MCU. This chip has a Maximum Clock Frequency of 72 MHZ.
2) Supports 2.8 inch, 3.5 inch color touch screen and original Ender3 printer LCD12864 screen.
3) Supports open source firmware Marlin2.0. This means it is convenient for users to customize their firmware and develop it. The firmware is upgraded with a SD card, which is very convenient and efficient!
4) Supported drivers are TMC 5160, TMC 2208, TMC 2209, LV8729, ST820, A4988, etc.
5) Dedicated ports for BL Touch, Stallguard, UART and SPI. Supports TMC2130 SPI, TMC5160 SPI, TMC2208 & TMC2209 UART.

8. ARM STM32 Development Board System Board STM32F103RCT6 Development Board 51 AVR

9. SH-CHEN STM32F103RCT6 Minimum Development Board Cortex-M3 STM32 ARM for Arduino - STM32F103ZET6, as described Accessories

Feature

Onboard the most basic circuit based on MCU, such as crystal oscillator circuit, power conversion circuit and USB interface, etc.
The core board draws out common I/O port resources.
Adopted the officially recommended low-load RTC crystal oscillator solution and used the Epson brand crystal oscillator, which largely avoided the problem that the RTC could not vibrate due to the use of cheap cylindrical crystal oscillator.
It is equipped with high-quality double-row pin with 2.54mm spacing to ensure excellent conductive contact. It is convenient for users to place the core board on the standard universal board or breadboard. Users can choose the welding direction according to their actual needs.
The SWD simulation debugging download excuse is introduced, which can be downloaded from the J-Link OB, ST-Link V2 or CMSIS-DAP debugging downloader of the small shop, which is convenient and simple.

10. 1pcs Original STM32F103RCT6 Microcontroller IC 32-Bit 72MHz 256KB (256K x 8) Flash

Conclusion

All above are our suggestions for stm32f103rct6. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using stm32f103rct6 with us by comment in this post. Thank you!