10 best solder wick and solder for 2020

It’s not that easy to choose the right solder wick and solder since there’s a ton of things you need to consider first. Some of the factors we paid attention to in our evaluation when reviewing the top solder wick and solder on the market. Through our research, weve looked through catalogues to pick out the very best for you. Through our comparison table, in-detail reviews of each product, were going to reveal the name of our best solder wick and solder on the marketbut dont skip to the end!

Best solder wick and solder

Related posts:

Best solder wick and solder reviews

1. Chemtronics Desoldering Braid, Chem-Wik, Rosin, 10-50L 0.10", 50ft.

Feature

Price For: Each Braid Material: Copper Width: 2.5mm Length: 50ft Braid Color: Blue Leaded Process Compatible: Yes Roll Length: 50ft RoHS Compliant: Yes

2. MG Chemicals #3 No Clean Super Wick Desoldering Braid, 0.075" Width x 5' Length, Green

Feature

No clean super wick
Flux residue is non-conductive and non-corrosive
Static free bobbins
Flux residue remaining on board does not have to be cleaned
High SIR-meets the requirements of both the bellcore specification TR-TSY-000078 and IPC test method III

3. NTE Electronics SW02-10 No-Clean Solder Wick, 4 Blue.098" Width, 10' Length

Feature

Removes up to four times more solder than conventional wick, and extracts solder much faster than wicks based on Type-R fluxes
Residue left behind is halide free and non-conductive, so it does not have to be cleaned off the board
100% copper wick has fine braid design to promote strong capillary action to pull in excess solder
Available with standard or anti-static bobbins

4. OMorc Desoldering Wick, Solder Sucker & Solder Braid (2.5mm Width, 1.5m Length) Desoldering Vacuum Pump Solder Removal Tool

Feature

Top-notch Quality. The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively.
Solder Wick Braid. The desoldering wick is 2.5mm wide and 1.5m in length. Weight: 0.4oz. With low residue design, this solder braid will help clean spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas.
Pure oxygen free copper wire, no clean flux for easy to use. The solder wick can help clean some residue flux and BGA thermal bonding pad too.
Compact and Lightweight. Measuring 7.48''X0.79'', the desoldering pump can be used with only one hand, either your right or left hand.
Solid Construction. The solder sucker has plastic backing to ensure stability.

5. Chemtronics 80-3-10 Soder-Wick Rosin SD Desoldering Braid

Feature

Price For: Each QTY 1 10' SPOOL

6. Vastar Solder Wick, 3 Packs Desoldering Wick, Solder Braid 2.5mm Width, 1.5m (5ft) Length

Feature

High quality desoldering braid
Unique no clean flux for easy to use
Pure oxygen free copper wire
Geometrically-precise weave
Size of the solder wick: Width 2.5mm, Length 1.5m, Weight 0.4oz

7. Tabiger Solder Wick & Desoldering Pump, Solder Sucker & Desoldering Wick, 2pcs Solder Braid (2.5mm Width, 1.5m Length)- Desoldering Vacuum Pump Solder Remover

Feature

One-handed solder sucker with powerful suction Whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready, the desoldering pump designed with double ring double open and "vacuum" button, which make the sucking power awesome.
Desoldering Wick with copper braid 2pcs solder braid with the size 2.5mm Width, 1.5m Length, this desoldering wick has geometrically-precise weave with copper and rosin, work from the tip of the desoldering wick, once the desoldering wick and the solder has been heated, the solder braid can quickly absorbed molten solder and left a clean working area.
ABS body with non-slip sponge and Nylon nozzle desoldering pump The body of the desoldering vacuum pump is made of high quality ABS, which make the solder sucker delicate and durable, also the covered sponge can absorb sweat and heat, make it comfortable to hold, the nylon nozzle of the solder suck can endure high temperature, thus it can be used for a long time.
3-in-1 Solder Removal Tool 1pcs desoldering vacuum pumps and 2pcs solder wicks, a must-have tool for electronics kit, the desoldering wick absorbs solder, the desoldering pump pulls it away quick, while the solder wick is better for small amounts of solder, the solder sucker takes up large amounts.
Widely used Solder Remover The Desoldering Wick & Desoldering Pump can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards, re-solder mechanical keyboard switches, unsoldering old wire from devices, desoldering computer parts such as a motherboard,clean alloy on smd components and more.

8. AUSTOR Desoldering Sucker and 6 Pcs Solder Braid Wick (2.0mm/2.5mm/3.0mm Width, 1.5m Length) with Flux - Desoldering Vacuum Pump Solder Removal Tool

Feature

High efficiency solder sucker - the desoldering pump designed with double ring and "vacuum" open button, you can remove solder from circuit board effectively by cocking it and pressing the trigger button with one hand
Desoldering braid wick with rosin - 6 pieces copper solder braid in 3 size, width 2.0mm/2.5mm/3.0mm, length 1.5m, 2 pieces for each size; geometrically-precise weave, can be used to clean the spare solder on the pin away to avoid short circuit, to meet your various of soldering needs
High quality material - the desoldering pump body made of premium quality ABS material, with non-slip sponge and nylon nozzle, anti-static, heat resistant and durable
Wide application - correcting mistakes on small PCB boards, removing relays and other components from printed circuit boards, cleaning small components, re-soldering and desoldering
7-in-1 solder removal tool - 1pcs solder sucker and 6pcs solder wicks in 3 size

9. Desoldering Wick & Desoldering Pump, Solder Sucker & Solder Wick(2.5mm Width, 1.5m Length), Solder Remover Kit for Desoldering

Feature

ONE-HANDED USE DESIGN The Solder sucker with simple construction, so whether you are right or left-handed, you can using the desoldering pump by just cocking it and pressing the trigger button with one hand when you are ready.
HIGH QUALITY AND POWERFUL SUNCTION The solder sucker has an aluminum bronze frame and a high pressure vacuum which can remove solder from a printed circuit board effectively.
ALLOY BRAIDED SOLDER WICK Precision weaving solder braid with the size 2.5mm Width, 1.5m Length, it could help clean the spare solder on the pin away to avoid short circuit, especially in small, hard to reach areas.
DURABLE DESOLDERING IRON TOOL The body of desoldering pump is made of aluminum, which can resistance to beat, corrosion and have good heat dispersion, the desoldering wick has geometrically-precise weave with copper and rosin, which show no nicking or bending after a long time.
A MUST-HAVE SOLDER REMOVAL KIT The solder sucker can be used for broad place, which the solder wick can be used for small, hard to reach areas, all together can be used to correct mistakes with small boards on PCBs, remove relays and other components from printed circuit boards.

10. 6 Packs Solder Wicks No-Clean Solder Braided Wicks Desoldering Wicks, 2.5mm Width 1.5m Length

Feature

What you get: come with 6 packs of no-clean solder wicks, each wick is about 2.5 mm/ 0.1 inch in width and 1.5 m/ 5 feet long, enough quantity and length for your daily needs
No-clean design: the solder braided wicks will just leave little residues after use and the residues are non-conductive and non-corrosive, you do not need to spending time removing them from the boards
Reliable material: the desoldering wicks are made of copper wires with nice quality, precise weaving design can improve the capillary effect and the redundant solder absorbing ability, increasing your efficiency
Wide applications: the braided solder wicks are suitable for labs, home and industry welding work, practical tools to remove solder and correct errors on small PCB boards, bringing lots of convenience for your work
Easy to use: the desoldering wicks can provide a easier way to correct mistakes on small PCB boards and will not make damage to the board, clean small components, suitable for re-soldering and desoldering

Conclusion

By our suggestions above, we hope that you can found the best solder wick and solder for you. Please don't forget to share your experience by comment in this post. Thank you!