16 best scope rings 30mm high vortex for 2020

It’s not that easy to choose the right scope rings 30mm high vortex since there’s a ton of things you need to consider first. Some of the factors we paid attention to in our evaluation when reviewing the top scope rings 30mm high vortex on the market. Through our research, weve looked through catalogues to pick out the very best for you. Through our comparison table, in-detail reviews of each product, were going to reveal the name of our best scope rings 30mm high vortex on the marketbut dont skip to the end!

Best scope rings 30mm high vortex

Related posts:

Best scope rings 30mm high vortex reviews

1. Vortex Optics Hunter 30mm Riflescope Rings - High Height (1.22 in)

Feature

These Vortex Hunter Rings position thecenterof the riflescope tube at a height of 1.22 inches (31.0 mm) from the base.
Mounting to a Picatinny or Weaver type rail, the standard, 2-screw Hunter rings are a nice match for general hunting setups.
Made from aircraft-grade 6061-T6 aluminum for optimum strength
Sold two rings per package.

2. UTG 30mm/2PCs Hi Pro LE Grade Picatinny QD Rings: 22mm Wide

Feature

4-screw High Profile "Tiger" Ring, Precision Machined From Aircraft-grade Aluminum Alloy with Anodized Black Matte Finish
Robust and User Friendly Ergonomic Quick Detach/Lock Lever Fully Adjustable to Fit on Any Picatinny Rail
High Quality Synthetic Protective Tape Applied on Rings Internal Surface
Tight Tolerance Control and Repeatable Positive Locking for Optimal Re-zero Performance
Extensively Field Tested under Extreme Operations and Well Received by Field Experts and Law Enforcement Personnel
Kindly refer the user manual attached below for troubleshooting steps and instructions.

3. Vortex Optics Precision Matched Rings 30mm - Height 1.26 inches - Picatinny Mount

Feature

These Vortex Precision Matched Rings position thecenterof the riflescope tube at a height of 1.26 inches (32 mm) from the base. Will only work with Picatinny spec mountswill not work with Weaver mounts.
Our Precision Matched Rings are kept in pairs throughout the manufacturing process ensuring perfection from one set to another.
We start with certified USA 7075 T6 billet aluminum and hold it to an extremely tight tolerance of .0005 using our precision Computer Numeric Controlled (CNC) mill.
These Vortex rings are serialized, vibratory tumbled, hand-bead blasted and finished off with a Type III hard coat anodize.
Sold two rings per package. Hex wrench included. Made in the USA.

4. Vortex Optics Sport Cantilever 30mm Mount - 2-Inch Offset

Feature

Use this cantilever mount for mounting 30 mm telescopic sights onto flattop style rifles.
The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement on your rifle.
The cantilever ring mount positions thecenterof the riflescope tube at a height of 1.59 inches (40.39 mm) from the base. Weighs 6.7 ounces.
Aluminum construction.

5. Vortex Optics Pro 30mm Riflescope Rings - High Height (1.12 in)

Feature

These Vortex Pro Rings position thecenterof the riflescope tube at a height of 1.12 inches (28.44 mm) from the base.
Streamlined, strong and durable, the Pro Rings use four T-15 Torx style socket cap screws for secure mounting of your riflescope. Unique design permits easy installation and removal of the scope into/out of the rings.
Permanently attaches to either Picatinny or Weaver bases. Square-edged crossbolt ensures positive engagement of ring to base.
Precision CNC machined from high strength 6061-T6 aluminum alloy. Durable black matte anodized finish.
Sold two rings per package. Made in USA.

6. Green Blob Outdoors 30mm / 1 inch Cantilever Scope Mount Scope Rings with Picatinny Rail Top Caps for Burris Leupold Vortex Nikon Scope

Feature

Green Blob Outdoors--- 30mm / 1 inch Riser Scope Rings Mount with 1 inch inserts for Rifles with Picatinny / Weaver Rail, Ring bases are milled as a single, tough unit, and both front and rear ring tops feature Picatinny tops for mounting additional accessories.
Easy installation with minimal effort over the rifle barrel and the cleaning rod
PEPR Proper eye position ready for combat rifle for Burris, Vortex, some Nikon models, Leupold, and many others.
This mount provides 2" of forward scope positioning on the .223 flat top platform.

7. Seekins Precision 30mm Tube .97" High 4 Cap Screw Scope Ring

Feature

this is a nationwide distributor of firearms and shooting sports accessories
Seekins Precision, Scope Ring, .97" High, 30mm, 4 Cap Screw, Black Finish
This product is manufactured in United States
Package Dimensions: 6.25" L x 3.62" W x 1.75" H

8. Seekins Precision 30mm Tube 1.26" Extra High 4 Cap Screw Scope Ring

Feature

Package length: 4.826 cm
Package width: 8.636 cm
Package height: 16.002 cm
Product Type: SPORTING GOODS

9. Vortex Optics Tactical 30mm Riflescope Ring High Height [1.18 Inches | 30.0 mm] - 2 Pack

Feature

Robust 6-screw Tactical Ring is perfect for mounting red-dot optics, magnifiers, and other accessories with 30mm tube diameters to your Picatinny rail.
When using this ring to mount a conventional riflescope, we strongly recommend lapping the rings for a proper and secure fit for your optic.
This Vortex Tactical Ring positions the center of the riflescope tube at a height of 1.18 inches (30.0 mm) from the base.
Sold two rings per package.

10. UTG ACCU-SYNC30mm Integral Picatinny Rings, Matte Black, High

Feature

Designed with significant lightening cuts to massively reduce weight without compromising durability
Radiuses edges and corners to prevent snagging, Scratching, or tearing of other gear and for effortless access to scope wind age and elevation turrets
Single mount utilizes locking torn screws and square-shaped Integral recoil stops for a secure zero hold
Precision CNC Machined from aircraft grade aluminum with a Matte Black anodize, designed to fit on MIL-STD-1913 Pica tinny rail platform
22mm saddle height, 50mm Offset distance, 112mm base length, high profile fits 30mm tube optics with up to a 73mm outer objective diameter

11. Monstrum High Profile Picatinny Scope Rings with See Through Base | 30 mm Diameter | Black

Feature

Sturdy 30mm diameter scope rings for use with standard 30mm scope tubes

12. Monstrum Slim Profile Series Offset Cantilever Picatinny Scope Mount | 30 mm Diameter | Black

Feature

Dual ring scope mount for mounting standard 30 millimeter diameter tube rifle scopes
Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount
Mounts to any flat top Picatinny rail equipped rifle
2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position
5 ounces in weight and 5 inches in total length, with a base of 3 inches and 2.5 inches of spacing between the rings

13. Monstrum Precision Picatinny Scope Rings | 30 mm Diameter | 1.35 inch Height - Extra High

Feature

1.35 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount
Monstrum Tactical Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld
30 mm diameter rings for mounting standard 30 mm rifle scope tubes
Base is compatible with Picatinny mounting systems | Not compatible with Weaver mounts
Available in four different heights to match the needs of any shooter: 0.85 inch, 1.00 inch, 1.20 inch, and 1.35 inch

14. Vortex Optics Pro Series Riflescope Rings - 30mm - Extra High Height [1.54 Inches | 39.1 mm]

Feature

These Vortex Pro Series Rings position the center of the riflescope tube at a height of 1. 54 Inches (39. 1 mm) from the base. Sold two rings per package.
The finishing touch to your rifle and optic combination. Pro Series rings combine rock-solid reliability and strength with high quality machining to ensure ultimate accuracy and consistency.
Streamlined, lightweight and durable, these rings use four T-25 Torx-style socket cap screws for secure mounting.
Fits Weaver and Pica tinny Rails
Weight (Per Ring): 53. 8 Grams - 1. 9 oz

15. Vortex Optics Pro Series Riflescope Rings - 30mm - High Height [1.26 Inches | 32.0 mm], Black

Feature

These Vortex Pro Series Rings position the center of the riflescope tube at a height of 1. 26 Inches (32. 0 mm) from the base. Sold two rings per package.
The finishing touch to your rifle and optic combination. Pro Series rings combine rock-solid reliability and strength with high quality machining to ensure ultimate accuracy and consistency.
Streamlined, lightweight and durable, these rings use four T-25 Torn-style socket cap screws for secure mounting.
Fits Weaver and Pica tinny Rails
Weight (Per Ring): 50. 7 Grams - 1. 79 oz.

16. Monstrum ZR250 H-Series V1 Hollow Frame Lightweight Offset Picatinny Scope Mount | 1 Inch Diameter

Feature

Dual ring scope mount for Picatinny rail platforms available for both 1 inch and 30 mm tube diameter rifle scopes
Hollow frame design weighs in at 4.3 ounces - 30% lighter than our previous generation scope mount models
Two inches of forward offset for flexible scope positioning and optimum eye relief
Uses hardened steel Torx mounting hardware to prevent stripping of the bolts
All Monstrum mounts and accessories come with a lifetime warranty

Conclusion

By our suggestions above, we hope that you can found the best scope rings 30mm high vortex for you. Please don't forget to share your experience by comment in this post. Thank you!