10 best scope mounts for ar – 15 1 inch 1.93 for 2024

It’s not that easy to choose the right scope mounts for ar – 15 1 inch 1.93 since there’s a ton of things you need to consider first. Some of the factors we paid attention to in our evaluation when reviewing the top scope mounts for ar – 15 1 inch 1.93 on the market. Through our research, weve looked through catalogues to pick out the very best for you. Through our comparison table, in-detail reviews of each product, were going to reveal the name of our best scope mounts for ar – 15 1 inch 1.93 on the marketbut dont skip to the end!

Best scope mounts for ar - 15 1 inch 1.93

Related posts:

Best scope mounts for ar - 15 1 inch 1.93 reviews

1. Modkin 1'' Weaver Scope Rings, Rifle Scope Mount High Profile Scope Mounts for Picatinny/Weaver Rail (1 inch, Set of 2)

Feature

Double 1'' scope ring mount for Picatinny/ Weaver Rail (21mm).
Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope.
Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.
The ring is for most scopes which are in 1''/ 25.4mm scope tube. High profile, 0.98'' gap from base of mount to bottom of rings. ( Item height: 2.1'')
With only 1 rail clamp screw and 1 scope clamp screw per side, just twist off the nut and mount the base on the 20mm rail easily.

2. Modkin Scope Rings, Rifle Scope Mount High Profile Scope Mounts for Picatinny Rail (1 inch, Set of 2)

Feature

Double scope ring mount for Picatinny/ Weaver Rail (21mm).
Design in hollowed-out configuration between the ring and the bottom of the base, to release heavy duty when clamping your scope.
Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.
The ring is for most scopes which are in 1''/ 25.4mm scope tube. High profile, 0.71'' gap from base of mount to bottom of rings. ( Item height: 2'')
With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1'' scope firmly, just twist off the nut and mount the base on the 21mm rail easily.

3. Vortex Optics Sport Cantilever 30mm Mount - 2-Inch Offset

Feature

Use this cantilever mount for mounting 30 mm telescopic sights onto flattop style rifles.
The 2-inch offset of this cantilever mount positions the scope in a forward location, allowing the correct eye relief and head placement on your rifle.
The cantilever ring mount positions thecenterof the riflescope tube at a height of 1.59 inches (40.39 mm) from the base. Weighs 6.7 ounces.
Aluminum construction.

4. Monstrum Slim Profile Series Offset Cantilever Picatinny Scope Mount | 1 inch Diameter | Black

Feature

Dual ring scope mount for mounting standard 1 inch tube rifle scopes
Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount
Mounts to any flat top Picatinny rail equipped rifle
2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position
5 ounces in weight and 5 inches in total length, with a base of 3 inches and 2.5 inches of spacing between the rings

5. MIZUGIWA 1inch /30mm Quick Release Cantilever Weaver Forward Reach Dual Ring Scope Mount

Feature

Fits 20mm Picatinny Weaver rails
Comes with 25.4mm reducer inserts so you can use this with 30mm and 25 mm (1 inch) body tube scopes.
Built in Weaver style rails - very handy fitting flashlights and lasers etc.
Front Lens Size: Up to 56mm - This figure describes the maximum size of the objective (front) lens.
Scope Mount with Qick Detach Locks for Picatinny Weaver Rail

6. MIZUGIWA 1 inch Cantilever Flat Top Weaver Forward Reach Dual Ring Rifle Scope Mount

Feature

Fits 20mm Picatinny Weaver rails
Front ring top and both side feature picatinny for mounting laser flashlight and compact red dot and so on accessories.- 1" Rings
Heavy duty - Scope Mount Weight about 8.38oz
Mount provides 2" of forward scope positioning on the .223 flat top platform
Riser Mount for Rifles with Picatinny/Weaver Rail, Ring bases are milled as a single, tough unit, and rear ring tops feature Picatinny tops for mounting additional accessories

7. Modkin Rifle Scope Rings, Medium Profile Scope Mounts for Picatinny/Weaver Rail (1 inch, Set of 2)

Feature

Double scope ring mount for Picatinny/ Weaver Rail (21mm).
Design in see-through style, provide potential visibility for open sights, meanwhile hollowed-out configuration helps to release heavy duty when clamping your scope.
Built-in tape inside per rings to prevent from marring the scope, also prevent sliding and holding postion accurately.
The ring is for most scopes which are in 1''/ 25.4mm scope tube. Medium profile, 0.5'' gap from base of mount to bottom of ring. ( Item height: 1.9'')
With 1 rail clamp screw and 2 scope clamp screw per side, ensure mount any 1'' scope firmly, just twist off the nut and mount the base on the 20mm rail easily.

8. Monstrum Slim Profile Series Cantilever Offset Dual Ring Picatinny Scope Mount with Quick Release | 1 inch Diameter | Black

Feature

Dual ring scope mount for mounting standard 1 inch tube rifle scopes to Picatinny equipped rifles
Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount
Attaches and detaches easily via integrated quick release mechanism, without additional tools or tightening
2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position
5 ounces in weight and 5 inches in total length, with a base of 3 inches and 2.5 inches of spacing between the rings

9. Monstrum Slim Profile Series Cantilever Offset Dual Ring Picatinny Scope Mount with Quick Release | 30 mm Diameter | Black

Feature

Dual ring scope mount for mounting standard 30 millimeter diameter tube rifle scopes to Picatinny equipped rifles
Slim profile design offers the weight of lightweight scope rings with the added rigidity and convenience of a one piece mount
Attaches and detaches easily via integrated quick release mechanism, without additional tools or tightening
2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position
5 ounces in weight and 5 inches in total length, with a base of 3 inches and 2.5 inches of spacing between the rings

10. Monstrum Precision Picatinny Scope Rings | 1 inch Diameter | 1.00 inch Height

Feature

1.00 inches in height, measured from the center of the rifle scope tube to the bottom plane of the Picatinny rail mount
Monstrum Tactical Precision Scope Rings are precision crafted to a given height specification to match your particular rifle setup and preferred cheek weld
1 inch diameter rings for mounting standard 1 inch rifle scope tubes
Base is compatible with Picatinny mounting systems | Not compatible with Weaver mounts
Available in four heights to match your needs: 0.80 inch, 1.00 inch, 1.20 inch, and 1.35 inch

Conclusion

All above are our suggestions for scope mounts for ar - 15 1 inch 1.93. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using scope mounts for ar - 15 1 inch 1.93 with us by comment in this post. Thank you!