Top rme babyface pro fs 24-channel usb audio interface for 2020

When you want to find rme babyface pro fs 24-channel usb audio interface, you may need to consider between many choices. Finding the best rme babyface pro fs 24-channel usb audio interface is not an easy task. In this post, we create a very short list about top 5 the best rme babyface pro fs 24-channel usb audio interface for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 5 rme babyface pro fs 24-channel usb audio interface:

Best rme babyface pro fs 24-channel usb audio interface

Related posts:

Best rme babyface pro fs 24-channel usb audio interface reviews

1. RME Babyface USB 2.0 High Speed Audio Interface 10 in, 12 out

Feature

Sample rates up to 192kHz on all I/O (including two ADAT channels via SMUX4)2 high-quality,
Steady Clock for maximum jitter suppression and clock refresh
RME's unique meter and analysis tool includedPeak and RMS are hardware-calculated for all channelsIn

2. RME Audio Interface (BABYFACEPRO)

Feature

Includes: 4 x Analog I/O, 2 x Phones Output, 1 x ADAT I/O, 1 x MIDI I/O, USB 2. 0, TotalMix FX, Class Compliant Mode, 2 x Line/Instrument Input
High-end yet portable interface incorporates newly designed analog and digital circuits
Energy saving technologies provide supreme fidelity with no compromises in level, noise or distortion.
Created with the highest precision from a block of aluminum

3. RME Babyface Pro FS USB Audio Interface

Feature

12 in/12 out USB Audio Interface with 24 total channels
2 microphone preamps and 2 instrument preamps
Full SteadyClock FS circuit as in the ADI-2 Pro FS for lowest jitter and highest jitter immunity
6 samples less latency on the AD side by ADC (5 samples AD, 7 samples DA. It won't get quicker...).
Rugged aluminum chassis that is durable and portable enough to take with you on the go

4. RME Audio Interface (BABYFACEPROFS)

Feature

+19 / +4 dBu switch on the bottom adds a direct way to reduce the output level, thus improves SNR for sensitive active monitors, avoids distortion / overload, and helps to keep TotalMix FX faders near 0 dB instead of high attenuations.
Full SteadyClock FS circuit as in the ADI-2 Pro FS for lowest jitter and highest jitter immunity.
3. 5 mm TRS phones output power rises from 70 mW to 90 mW. THD of both phones outputs improved by up to 10 dB. Uses same output op-amps as ADI-2 Pro now. Output impedance of 3. 5 mm TRS lowered from 2 Ohms to 0. 1 Ohms.
Mic inputs SNR improved from 112. 2 dB to 113. 7 dB, TRS Line inputs SNR improved from 114 dB to 116. 3 dB (120 dBA). THD Line inputs improved by 8 dB.
6 samples less latency on the AD side by new ADC (5 samples AD, 7 samples DA. It won't get quicker. . . ).

5. RME Babyface Pro FS 24-Channel 192kHz USB Audio Interface with Audio-Technica ATH-M40x Headphones & XLR Cable Bundle

Feature

+19 / +4 dBu switch on the bottom adds a direct way to reduce the output level, thus improves SNR for sensitive active monitors, avoids distortion / overload, and helps to keep TotalMix FX faders near 0 dB instead of high attenuations.
Full SteadyClock FS circuit as in the ADI-2 Pro FS for lowest jitter and highest jitter immunity.
3.5 mm TRS phones output power rises from 70 mW to 90 mW. THD of both phones outputs improved by up to 10 dB. Uses same output op-amps as ADI-2 Pro now. Output impedance of 3.5 mm TRS lowered from 2 Ohms to 0.1 Ohms.
Mic inputs SNR improved from 112.2 dB to 113.7 dB, TRS Line inputs SNR improved from 114 dB to 116.3 dB (120 dBA). THD Line inputs improved by 8 dB.
6 samples less latency on the AD side by new ADC (5 samples AD, 7 samples DA. It won't get quicker...)

Conclusion

By our suggestions above, we hope that you can found the best rme babyface pro fs 24-channel usb audio interface for you. Please don't forget to share your experience by comment in this post. Thank you!