10 best pull bar for vinyl plank flooring for 2024

We spent many hours on research and managed to find top 10 pull bar for vinyl plank flooring that is best suitable for you. This review is based on reliable sources, product specs, and hundreds of customer reviews. In this article, were going to highlight the main features of the best pull bar for vinyl plank flooring and why they are important when it comes to choosing the right one.

Best pull bar for vinyl plank flooring

Related posts:

Best pull bar for vinyl plank flooring reviews

1. REXBETI 43-Piece Laminate Wood Flooring Installation Kit with 40 Spacers, Tapping Block, Heavy Duty Pull Bar and Diameter 1 3/8" High-Strength Fiberglass Handle Mallet, Non Slip Soft Grip

Feature

High-strength fiberglass handle mallet with non-slip rubber grip help absorb vibration. Double-faced solid rubber head delivers a softened, positive strike. The mallet head is 35 mm in diameter(other brands usually is 25mm).No any issue about the head of mallet fell apart and handle bent
Upgraded pull bar is more longger and thicker than others.Others are usually only 3 mm thick, 10.5 inch long and easily deformed.Ours is 4mm thick, 12 inch long is heavy duty
Suitable for 0.27in (7mm) - 0.6in (15mm) laminate or hardwood flooring
REXBETI flooring installation kit have 40 spacers, more than other brands.Let you install your laminate wood flooring more convenient and easier
Package included 1 x rubber hammer; 1 x pull bar; 1 x tapping block; 40 x spacers

2. Bullet Tools - 712HD Professional Heavy Duty Pull Bar and Pry Bar for Hard Flooring Installation

Feature

17 inches long
Closes gaps when installing laminate and hardwood
Fully felted bottom to protect your floor
Heavy duty 1/4" plate steel construction means this may just be the last one you buy
Black powder coat

3. REXBETI 43-Piece Upgraded Laminate Wood Flooring Installation Kit with Solid Tapping Block, Long and Wider Pull Bar, Diameter 1 9/16" Reinforced Double-Faced Mallet and 40 Spacers

Feature

High-strength fiberglass handle mallet with non-slip rubber grip help absorb vibration. Double-faced solid rubber head delivers a softened, positive strike. The mallet head is 40 mm in diameter(other brands usually is 25mm).No any issue about the head of mallet fell apart and handle bent
12.2 inch long, 4.5mm thick Upgraded pull bar is more longger and thicker than others.Others are usually only 3 mm thick, 10.5 inch long and easily deformed
40 spacers included. Allow you to install your laminate wood flooring more convenient and easier
Suitable for 0.27in (7mm) - 0.6in (15mm) laminate or hardwood flooring
Package included 1 x rubber hammer; 1 x pull bar; 1 x tapping block; 40 x spacers

4. CRAIN Knucklehead Pull Bar

Feature

3/16" Heavy Gauge Steel Design
Unique Designed Boxed "Knuckle-Shaped" Hammering Head
Felt Pads On Its Underside To Prevent Scratching
3" Wide Design Protects Flooring / 14 1/2" Length Of Working Room When Used Near The Wall
Can Be Used On Hardwood Flooring, Laminate Flooring & Vinyl Plank Flooring

5. MOONWELL Pull Bar for Laminate Plank and Wood Flooring Installation (13 inch)

Feature

Pro pull bar for vinyl plank, laminate and hardwood flooring installation
The short end is thinner than usual pull bars to fit tight spaces against a wall
Made of manganese steel that is tough and durable
Used to pull planks together of tongue and groove
For use with a mallet

6. Big Max Pro Pull Bar w- Square Striking Head - USA Carpentry Tool w- 47 Years Experience! A Must Have Flooring Pull Bar for Hardwood, Vinyl Plank, and All Brands of Laminate Flooring

Feature

Backed by 47 years of experience in manufacturing floor installation tools.

Applicable to all types of Tongue and Groove flooring.

Prevents marring of the edges of the planks.

Felt pads to protect floor finish.

Long lasting and durable.

7. Professional Wood Laminate Flooring Installation Kit with Heavy Duty Pull Bar, Durable Rubber Tapping Block, Double-Faced Carbon Steel Hammer, Foam Knee Pads and 40 Wedge Spacers

Feature

VERSATILE FLOORING INSTALLATION KIT - This kit is a premium combination of high quality flooring installation tools which include 1 x heavy duty pull bar, 1 x vinyl rubber tapping block, 1 x ultra-strong double faced hammer, 1 x protective foam keen pads and 40 x flooring installation wedge spacers.
PREMIUM QUALITY AND BUILT TO LAST - Get rid of cheap and fragile plastic made tapping block, but take look at Thumbsup Kit ultra durable vinyl rubber made tapping block for long term usage. Unlike other toy hammers, Thumbsup Kit heavy duty double-faced rubber hammer with weight of 1.35 lb is made with tough carbon steel, and makes handle forged into mallet heads as one whole to avoid falling apart.
EXCELLENT PROTECTION - Extra thick high strength steel made pull bar designed with 3'' wide front edge and felt pads at back help to prevent damaging and scratching your plank during installation. Comfortable and waterproof 0.6'' extra thick foam knee pads are designed to protect your gentle knees from long time working on stiff flooring.
ONE SIZE FITS ALL - Durable tapping block with specially designed 0.4'' deep groove to enable you to work on all brands of wood laminate flooring ranging from 0.24'' to 0.6'' thick. Multiple-use knee pads with adjustable straps at back to fit almost any knee.
EASY TO USE WITH BONUS - 40 x wedge spacers are included to facilitate flooring installation of large flooring area. Stored in the end cap of hammer handle, a bonus magnetic nail holder helps aid your DIY work.

8. Heavy Duty Pull bar for Vinyl Plank Flooring and Laminate Wood Flooring Installation Tool,12.2 inch Long

Feature

PERFECT DESIGN :Pull bar used for laminate, tongue-and-groove, vinyl plank, wood flooring and hardwood flooring installation
UPGRADE SIZE12.2 inch /310mm long, 4mm thick Upgraded pull bar is more longger and thicker than the normal design.the normal design are usually only 3 mm thick, 10.5 inch long and easily deformed
ENHANCED PULL BARMade from premium A3 steel with matt coating, the pull bar designed with enhanced strength and corrosion resistance.The soft pads on the back can well protect the floor from scratch.
FIT FORSuitable for 0.27in (7mm) - 0.6in (15mm) laminate or hardwood flooring
GOOD FUCTION:This flooring installation pull bar tool allows you to work in tight spaces or close to the wall, closing the gaps and seams in laminate floors without causing damage Perfect alternative to tapping blocks

9. WORKPRO Laminate Wood Flooring Installation Kit with Reinforced Double-Faced Mallet, Heavy Duty Pull Bar, Tapping Block and 30-Piece Spacers Included

Feature

Reinforced Mallet: Constructed of cast iron with bright chrome plating, the hammer is equipped with the hardness of 905 HAS. The double-faced solid PVC head delivers a softened, positive strike. The mallet head is 1-3/8 inch in diameter. The handle is made of American hickory which is lightweight but tough. The whole mallet is 10-3/4 inch long and weighs 1.036lb.
Enhanced Pull Bar: Made from premium A3 steel with matt coating, the pull bar designed with enhanced strength and corrosion resistance. The pull bar is 12-1/4 inch long and 1-1/8 inch thick, which is superior to the normal design. The soft pads on the back can well protect the floor from scratch.
Solid Tapping Block: The tapping block made from of polypropylene is designed solid, which is more sturdy and durable. The approximate size of the block is 7-7/8 x 2-1/2 x 3/4 inch.
30-Piece Spacers: The kit comes with 30 pieces plastic spacers which are designed with non-slip slots. The approximate size of the spacer 2-3/8 x 1-1/8 inch.
The kit is perfect for domestic and professional use for laminate or hardwood flooring with guaranteed quality. You are always welcomed to contact us for warranty service whenever there is any problem with the product.

10. Laminate Wood Flooring Installation Kit with Extra Strong Solid Tapping Block Heavy Duty Pull Bar Non Slip Soft Grip Double Faced Mallet 40 Spacers Included and 10 inch Duplicator Gauge with Lock

Feature

EVERYTHING YOU NEED - Be prepared for any DIY floor installation tasks with this kit. It comes with a rubber mallet, a 12" pull bar, a solid tapping block, 40 spacers, and a 10" contour gauge.
DUPLICATE ODD ANGLES - Copy odd-shaped angles and edges like a pro. The 10-inch duplicator gauge with lock is perfect for making accurate copies of curved corners, round edges, and tight trim angles.
INSTALL MOST KINDS OF FLOORING - This laminate flooring installation kit is a must-have for DIY or professional use. This set may be used for installing laminate, vinyl, hardwood, or tile floors.
BUILT TO LAST - You can expect all these flooring tools to stay in perfect shape for many years. Each one shows off solid construction, giving you peace of mind that they can withstand heavy duty use.
CUSTOMER SATISFACTION - This floor installation kit is backed by a Limited Lifetime Warranty. If you're not happy with this set, let us know within 1 year of purchase so we can issue a refund.

Conclusion

By our suggestions above, we hope that you can found the best pull bar for vinyl plank flooring for you. Please don't forget to share your experience by comment in this post. Thank you!