Best pei sheet ender 3 v2 for 2024

It’s hard to know which is good pei sheet ender 3 v2. There are alot of pei sheet ender 3 v2 reviews on internet. In this article we suggest top 10 the best pei sheet ender 3 v2 for you. Please read carefully and choose what is the best pei sheet ender 3 v2 for you.

Best pei sheet ender 3 v2

Related posts:

Best pei sheet ender 3 v2 reviews

1. PEI Magnetic Flexible Heated Bed 235x235mm for Ender 3/ Ender 3 V2/ Ender 3 Pro/Ender 3 Prox/Ender 5/ Ender 5 Pro

Feature

Flexible, removable, can stick to magnetics very well. High strength and heat resistance.
Compatible with PLAPETGPEEKABS and any other filaments.
No more tape, no more glue, no more shovel, and release your printing anxiety
Easy to adhere to the printing surface, easy to remove the prints, flex slightly to pop your print right off.
When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.

2. FYSETC Ender 3 Flexiable Build Surface Double Sided Textured Pei Powder Coated Spring Steel Sheet with Magnetic Base 9.2x9.2 inch/ 235x235mm for Ender 3S 3 Pro v2 /Ender 5 / Ender 5 Pro/CR 20 Pro

Feature

Compatible with Ender 3, Ender 3 Pro, Ender 3X, Ender 3 V2, Aquila X2.
Size: 235mm x 235mm. Two sides are textruder PEI, which is more convenient, compare with others single textrued PEI, double PEI is durable working time.
Two-in-one type of PEI powder coated hardended steel spring sheet nerver disforming, Magnetic base with strong magnetism
Easy to install, easy to remove the models by bending or popping it off, material compatibility range is wide, such as PLA, ABS,PETG, TPU,PUA, etc. Make it possible to add inductive Z-probe and add ABL for some printers need to be upgraded
Just wipe down with isopropyl alcohol between prints for best results.

3. PEI Sheet 235x235mm, Ender 3 Bed Magnetic Flexible Heated Bed with Adhesive for Creality Ender 3 Pro/Ender 3 V2/Ender 3 S1/Ender 5/Ender 5 Pro/CR-20/Voxelab Aquila/Voxelab Aquila C2/ 3D Printer

Feature

Size - 235x235mm/9.2x9.2in. Applicable models: Ender 3/ Ender 3 Pro/ Ender 3S/ Ender 3v2/ CR 20/ CR 20 Pro/ Ender 5/ Ender 5 Pro, or other hot bed size 235x235mm/9.2x9.2in model. Compatible with PLA/PETG/PEEK/ABS and any other filaments.
Excellent Adhesion & Removable - Upgrades magnetic build surface provides the best adhesion. Once the hotbed cools back to room temperature, lift off the mat and gently bend the magnetic surface, the base will release the model which can be easily removed by hand.
Easy to Install - The build surface adhesive comes with upper magnetic build surface and lower magnetic adhesive base. Place lower adhesive surface on top of normal build plate. High strength and reusable.
Universal - Ender 3/ Ender 3 Pro/ Ender 3S/ Ender 3v2/ CR 20/ CR 20 Pro/ Voxelab Aquila/Voxelab Aquila C2/Voxelab Aquila X2
Note - If you have any question or need technical support about the product, Please press "Ask a question" through our storefront's page, report an issue through the Your Orders page. We will respond with 24 hours.

4. ChowThink Double Sided PEI Magnetic Flexible Heated Bed 235x235mm for Ender 3/ Ender 3 V2/ Ender 3 Pro/Ender 3 Prox/Ender 5/ Ender 5 Pro +Silicone Handle

Feature

Super Convenient removable, magnetically secured, build surface for hassle free model removal, PEI surface provides the good adhesionThe steel platform with a silicone handle, easy to hold and does not hurt your hands.
Simple InstallationThe PEI sheet is combined with 2 parts, a flexible steel platform coated with PEI surface and a magnetic bottom sheet with adhesive on the back,simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top.
Easy Removal This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands.
Wide ApplicationPlease confirm the size of your printer. After installing the print bed, please re-level it to improve the printing effect. The size of PEI bed is 235*235mm9.25*9.25inch, it is applicable with Creality 3D printer such as Ender-3 Pro, Ender-3 V2Ender-3, Ender-3S, Ender-3X, Ender-5, Ender-5 ProCR-20, CR-20 Pro
Good serviceEvery product passed QC before shipment. But if you have problem, we provide free return/exchange in 90 days, pls contact us.

5. HICTOP Flexible Steel Platform with PEI Surface and Magnetic Bottom Sheet with Adhesive 235x235mm for Ender-3 Pro, Ender-3 V2Ender-3 3D Printers

Feature

The HICTOP PEI sheet is combined with 2 parts, a flexible steel platform coated with PEI surface and a magnetic bottom sheet with adhesive on the back. The PEI comes pre applied.
The HICTOP PEI sheet is very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 130 on the bed.
Excellent adhesion can be achieved when the temperature of the heated bed is about 60, you can print directly on the HICTOP PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60 bed temperature. It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85
Prints come off the surface easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it.
The size of HICTOP glass bed is 235*235mm9.25*9.25inch, it is applicable with Creality 3D printer such as Ender-3 Pro, Ender-3 V2Ender-3, Ender-3S, Ender-3X, Ender-5, Ender-5 ProCR-20, CR-20 Pro and similarly sized machines.

6. TRIZEDA Creality PEI Magnetic Flexible Steel Plate Upgraded for Ender 3/Ender 3 V2/Ender 3 S1/Ender 5/Ender 5 pro Black 235x235x0.4mm

Feature

The size of the 3D printer PEI magnetic flexible steel plate is 235*235*0.4mm. It is applicable with Creality 3D printer such as Ender-3/Ender-3 Pro/Ender-3S/Ender-3 V2/Ender-5/Ender-5S/Ender-5 Pro
The black 3D printer PEI magnetic flexible steel plate combined with 2 parts, a flexible steel platform coated with PEI surface and a magnetic bottom sheet
Easy to stick and easy to removeConsumables are easy to stick to the printing bed, no need for other tools such as tape and glue, easy to remove the prints, just repeatedly gently bend the prints immediately.
Only 0.4mm thickness 3D printer build surface bed cover .It's a thin and flexible plate , but the steel material made it strong resistance and durable
High Temperature Resistant Printing Layer Recommended printing temperature between 60-100

7. HICTOP Upgrades Flexible Build Plate PEI Steel Sheet Textured Bed (235 * 235)

Feature

Hight Flatness/long lasting :Improved HICTOP PEI plate provides more flat and more smooth build surface than other plate, ensuring high flatness for the bottom of model.long lastingThe service life of our pei is 10 times longer than other Glass Bed
easy to use/Easy to clean simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 130 on the bed.It can be cleaned easily with water or alcohol
New upgrade: movable, magnetically fixed construction surface, model can be easily removed. Say goodbye to disassembly tools, shovels and knives. Reduce workload and save time
No Edge Curling/Strong adhesion The HICTOP PEI sheet is molds could stick on bed firmly without glue, avoiding the issue of print edges curling.Excellent adhesion can be achieved when the temperature of the heated bed is about 60, without using any glue or other tools to help the model to stick onto the sheet
Packing: Textured steel platform coated with PEI surface *1 magnetic bottom sheet with adhesive on the back *1

8. Creality 3D PEI Magnetic Sheet Heated Bed Build Platform for Ender 3/ Ender 3 pro/Ender 3 v2/Ender 5/Ender 5pro 235x235mm

Feature

Flexible, removable, can stick to magnetics very well. High strength and heat resistance.
Compatible with PLAPETGTPUABS and any other filaments.
Easy to adhere to the printing surface, easy to remove the prints, flex slightly to pop your print right off.
When used in a 3D printing application, PEI is excellent because it can withstand the numerous heat cycles that a 3D print bed goes through from print to print.
Creality authorized 3d printer build plate, we provide timely after sales support

9. Creality Ender 3 / Ender 3 Pro / V2 / 5/5 Pro Glass Bed 235x235x4mm With Composite Coating for Advanced Adhesion and Tool-less Part Removal PEI Sheet, Binder Clips and Spatula Upgrade Kit

Feature

A Borosilicate glass bed featuring a carbon-silicone composite coating with outstanding hardness and flatness. When heated, this coating will increase adhesion with 3d printed parts and help to prevent issues such as warping. It is incredibly flat, meaning it can produce reliable and even bed leveling resulting in consistent and perfect first layers. Excellent upgrade for Ender 3/Pro/V2/5/5 Pro as they often have warped spots on the stock aluminum plate bed resulting in failed prints.
Once the print has finished and the bed has cooled down the printed part will pop off of the composite coated side of the glass bed with minimal force needed. No need to use a spatula to pry the part off of the bed after the print is finished. This leads to less damage to printed parts and the print surface. Do not try to remove the part from the bed before it has cooled to room temperature as this could damage the coating
Includes PEI sheet for installation on non-coated side of the glass bed. Apply the adhesive backed PEI sheet to a cleaned glass surface and use the included spatula to assist in installation of the sheet on the back side of the bed. PEI works well with higher bed temperatures and all kinds of filaments adhere very well to the surface. The smooth matte finish leaves a smooth finish on the bottom of printed parts. PLA, ABS, PETG and other filaments all can be used effectively with PEI
Pack of 4 small binder clips included to secure the glass bed to the stock aluminum frame for Ender series printers. These smaller clips take up less space in the build area and keep the bed tightly fixed to the y axis to avoid any failed prints
F1RST LAYER is a proud authorized distributor of Authentic Creality products. If you have any questions or issues with your purchase, please do not hesitate to contact us and we will be happy to provide quick and friendly assistance. This size bed is compatible with Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3x, Ender 5, Ender 5 Pro

10. Flexible Steel Platform with Textured/Smooth Double Sided PEI Sheet Build Plate235mm x 235mmfor Ender-3/3 Pro/3 V2/5,Artillery Genius, Anet A8, Biqu B1,Neptune, Aquila,CR-20, Saphire Pro.

Feature

Special Design: Excellent double-sided PEI magnetic build plate design. The smooth surface and matte texture can meet your needs at the same time. Higher cost performance and One multi-purpose.
Proven Solution: No glue, No tape, PEI printed bed with authentic 3M has strong adhesion; No scraping, easy to remove the printed matter from the bed by bending. Through hundreds of experimental tests, repeated use is still as new.
Good Quality: Flexible, removable, high strength and heat resistance, Four-Layer design, thicker and more durable. Easily handle temperatures up to 130C. And perfect for PLA, PEEK, ABS.
Practical Features: 235x235mm PEI sheet size is suitable for Ender 3 ,Ender 3 V2, Ender 3 Pro, Artillery Genius, Anet A8 ,Ender 3 Pros, Ender 5, Ender 5 Pro, CR-20, CR-20 Pro,and similar size 3D printers
Quality Promise: All products have UNDERGONE QUALITY INSPECTION before delivery. If you have any questions about product quality and suggestions, please feel free to contact us and we will reply within 24 hours.

Conclusion

By our suggestions above, we hope that you can found the best pei sheet ender 3 v2 for you. Please don't forget to share your experience by comment in this post. Thank you!