10 best pcie case fan for 2020

It’s not that easy to choose the right pcie case fan since there’s a ton of things you need to consider first. Some of the factors we paid attention to in our evaluation when reviewing the top pcie case fan on the market. Through our research, weve looked through catalogues to pick out the very best for you. Through our comparison table, in-detail reviews of each product, were going to reveal the name of our best pcie case fan on the marketbut dont skip to the end!

Best pcie case fan

Related posts:

Best pcie case fan reviews

1. Phanteks Universal Fan Controller, PH-PWHUB_02 Low Profile Design, Universal Fan Controller, Magnetic Housing, Three Speed Modes with Remote Control

Feature

Controller for three speed modes: Silent, Balanced, Performance
Magnetic housing for easy installation. Dual protection design.
PWM for all fans (3pin or 4pin). Supports up to 8 fans or more (with optional Y-Splitters).
Includes y-splitter for 3pin and 4pin fans. 400mm SATA power cable
Low profile design

2. Electop PC Chassis Fan Hub CPU Cooling HUB 10 Port 12V 4 Pin Fan PWM Hub Molex Controller

Feature

Expand 4-pin fan interfaces, solving the problem of lack of motherboard fan interfaces. Designed for 12V 4-Pin 3-Pin fans, support simultaneous starting at most 10 channel fans.
In the hub interfaces, the RED CPU interface is the CPU fan dedicated interface (with speed detection function). Since the mainboard can only receive one rotation speed signal, the remaining nine conventional fan interfaces have the PWM function, but no speed signal.
For both 4-Pin and 3-Pin fans. Please note 4Pin fan speed can be adjusted by temperature control. 3Pin fan can also be used, but because 3Pin has no PWM function, it is at fixed speed after inserting.
There is EVA double-sided adhesive at the back of the hub, which can be easily affixed to a flat place. Also a fixing screw hole in the middle of the PCB to facilitate fixing to a part of the chassis.
RED is expected to be a pass through for the CPU fan. So, the hub has a power source fed from the computer power supply, then the speed is regulated by the speed for the "source" fan. You can connect to the CPU fan lead on the system board or the chassis fan lead. The ten fans will spin at the same speed, that designated by the system for that fan. If the chassis fan is configured in BIOS to run at 50%, you will have 10 fans at 50%.

3. StarTech.com Expansion Slot Rear Exhaust Cooling Fan with LP4 Connector (FANCASE), Black

Feature

System fan kit
Easy to install and use
Constructed with top quality components

4. Vantec SP-FC70-BL Spectrum System Fan Card with Dual Adjustable 70mm UV LED Fans (Blue)

Feature

Increase Air Circulation, Lower Case Temperature
Built-In Ultra Bright UV LED Lights
Adjustable Fan Speeds
Perfect for Windowed Cases
Dual 70mm Ball Bearing Fans

5. 5pcs Black PCI Slot Cover Dust Filter Blanking Plate Hard Steel with Screw

Feature

Cover up open PCI slots with these standard case vented slot covers
Measures 4.75 inches long by 0.75 inches wide
Package includes: 5 x PCI Slot Cover5 x screws
Product Name : PCI Slot Cover;Material : Hard Steel

6. PCI Slot Bracket Three Fan Rack Mount Set for VGA Video Card Cooling

Feature

Product Name : PCI Slot Bracket;Fit for : Three 80mm or 90mm Fan(Not Include)
Size : 12 x 2.7cm / 4.7" x 1.1" (L*W)3 x 2.6cm/1.2" x 1"(L*W);Material : Metal
Color : Black
Net Weight : 69g
Package : 1 Set xPCI Slot BracketSome Install Screws

7. SilverStone Technology Fortress Z Aluminum Unibody Mini-ITX/DTX Small Form Factor SFX Computer Case with PCI-E Riser and Custom Low Profile Fans FTZ01S Silver

Feature

Classic exterior built from aluminum unibody frame
Support graphics card up to 13 inches
Mini-ITX motherboard & SFX PSU compatible
Maximum performance in slim form factor with support for liquid cooling
Positive air pressure design for excellent cooling/quietness and dust-prevention
Fits in nearly any environment with horizontal or vertical orientation

8. GDSTIME Graphic Card Fans, Graphics Card Cooler, Video Card Cooler, PCI Slot Dual 90mm 92mm Fans, VGA Cooler

Feature

Package include: 1 Piece Graphic Card Fans with 1*Power D-type Interface cable
Dimension: 92mm(L) x 92mm(W) x 25mm(H) / 3.62in(L) x 3.62in(W) x 1in(H) in per fan. Totally Size: 185mm(L) x 120mm(W) x 30mm(H) / 7.28in(L) x 4.72in(W) x 1.18in(H)
Rated Voltage: DC 12V; Rated Current: 0.2Amp; Rated Speed: 2000 RPM; Air flow: 86CFM; Noise: 27dBA
D-type interface cable included four interfaces, three voltages: 5V 7V and 12V; Different voltages with different airflow, speed, and noise. you can select the appropriate voltage interface to start the fan.
2 fans combined into one interface, Can be connected to the motherboard's 3-pin or 4-pin interface and you only need to access one interface to run all the fans.

9. Maxmoral 1-Pack Dual Fan Mount Rack PCI Slot Bracket for Video Card DIY Support 9cm/12cm Fan Computer Radiator Holder

Feature

Type: 1 Set PCI Slot Fan Mount Bracket, Simple design, easy operation, come with matched fixing screw fasteners, convenient to install.
Made of high quality metal material with fine workmanship, black stoving varnish surface, beautiful appearance, rust and corrosion resistance, durable to use.
Supply with 1 PCI slot brace and 2 fan connectors, used to mount dual PC cooling fan in one PCI slot bracket.
Effectively improve the system heat dissipation effect, reduce PC case noise, for more powerful performance.
Fit for 9cm, 12cm fan, good compatibility with most of graphics cards. Practical fan accessories for computer project DIY.

10. Cooler Master MasterBox MB311L ARGB Airflow Micro-ATX Tower with Dual ARGB Fans, Fine Mesh Front Panel, Mesh Intake Vents, Tempered Glass Side Panel & ARGB Lighting System

Feature

Fine Mesh Front Panel: Cooler Masters Fine Mesh design on the front panel is proven to provide proficient airflow while filtering out dust.
Mesh Intakes: Large, mesh intakes span each side of the front panel to provide additional airflow to system.
Dual ARGB Fans: Dual pre-installed 120mm ARGB fans with splitter can be managed by the motherboard, to create a customized ARGB lighting system. Motherboard Support - Micro ATX, Mini ITX
Tempered Glass: Hardware, custom-loop cooling, or the pure pride of showing off the build in panoramic view through an edge-to-edge tempered glass side panel.
Adaptable Drive Cage: The drive cage is movable, able to shift toward the front to accommodate for PSU space, backwards to provide additional radiator space, or even completely removed.
Versatile Cooling Options: Support a total of six 120mm fans, front, top and rear radiator placement to ensure no compromise on cooling performance.

Conclusion

By our suggestions above, we hope that you can found the best pcie case fan for you. Please don't forget to share your experience by comment in this post. Thank you!