10 best oscilloscope kit 2 channel for 2020

It took days of going through more than a thousand customer reviews and conducting expert researches to narrow down the list. Weve included a comparison table below to give you a quick summary of our top 10 oscilloscope kit 2 channel. Its followed by an in-depth review of each oscilloscope kit 2 channel. Hopefully, once you are done reading this article, you will be well informed about oscilloscope kit 2 channel and be able to select the right oscilloscope kit 2 channel for you without any hesitations.

Best oscilloscope kit 2 channel

Related posts:

Best oscilloscope kit 2 channel reviews

1. kuman DSO 138 DIY Oscilloscope Kit Opening Source 2.4" TFT 1MSPS Digital Oscilloscope Kit with DIY Parts & Probe, Handheld Pocket Sized 13803K, SMD pre-soldered

Feature

Dso138 2. 4" Tft 1msps digital oscilloscope kit for DIY it's easy to solder.
Oscilloscope functions with no fancy features. Simplicity in structure and easiness in assembly
It uses 2. 4-Inch tft lcd (320 x 240 dot-matrix, 262K colors) as its display element and displays nice
Detailed assembly instructions are provided in combination with troubleshooting guide and schematc.
7-24 friendly customer service provided.

2. DSO 138 Oscilloscope Kit Open Source with Probe 2.4" TFT 1Msps Digital Oscilloscope Kit with DSO 138 Case + Probe 13803K for Electronic Learning Set

Feature

This kit uses ARM Cortex-M3 processor (STM32F103C8), and includes a 2.4-inch color TFT display screen, can be used as ARM test development board.Can freeze at any time waveform display (HOLD function).Comes 1Hz /3.3V square wave test signal source.
With automatic, regular and one-shot modes, easy to capture the moment waveform.Available rising or falling edge trigger.Observable previous trigger waveform (negative delay).
With waveform parameter digital display, including frequency, period, pulse width, duty ratio, MAX./MIN./AVG./Peak-Peak/virtual values.Waveform storage function: will not lose the waveform after power off.
Partially open-sourced,the MCU has been programmed.The oscilloscope circuit boards components are pre-soldered, no need soldered by yourself.The case is unassembled and requires assembly.
Adjustable vertical displacement,and with instructions,which increase the likelihood of adding different features or developing new applications on the hardware for users.

3. Pico 2205A PicoScope 2 channel + AWG, 25MHz, Includes probes

Feature

Scope 2205A 2 channel 25 MHz, 8-bit oscilloscope with probes
25 MHz bandwidth
1 GS/s sampling
Advanced digital triggers
Arbitrary waveform generator

4. Hantek DSO5102P Digital Storage Oscilloscope USB 100MHz 1GSa/s 40K,2 Channel,2CH

Feature

100MHz bandwidths;1GSa/s Real Time sample rate.
Large (7.0-inch) color display,WVGA(800x480);Record length up to 40K.
Trigger mode: edge/pulse width/line selectable video/slop/overtime etc.
USB host and device connectivity, standard;Multiple automatic measurements.
Four math functions, including FFTs standard;Provides software for PC real-time analysis.

5. Siglent Technologies SDS1202X-E 200 mhz Digital Oscilloscope 2 Channels, Grey

Feature

200 mhz bandwidth
Real-time sampling rate up to 1 gsa/use
IRecord length up to 14 Mpts
Standard serial bus triggering and decode, supports iic, spi, uart, Rs232, can, and lin
1M points fft

6. SainSmart DS482i 2 Channel Virtual PC/Mobile Oscilloscope, 20Mhz Analog Bandwidth, 50 MSps Sample Rate

Feature

PC/Mobile Supported: Transform your smartphone or tablet into an oscilloscope. Support mobile Android system and Windows' PC screens to watch waveforms, it makes measurement more convenient. Just bring your phone and you can work anytime, anywhere.
Portable Design: Lightweight and portable design, easy to carry. With the USB 2.0 interface, it can be powered over the USB connection, plug, and play. You no longer need to grab an oscilloscope with your colleagues in the lab, and it is easy to carry on a business trip. You can test it whenever you have an idea.
.net Software Architecture: With the new .net architecture, it is more stable and more beautiful, with more reliable compatibility.
Hardware Trigger Function: A single trigger can be carried out in all cases of sampling rate, and the sporadic aperiodic signal can be analyzed.
Paperless Recorder: Record voltage changes for a long time in 72 hours, generate curves, save data.

7. Oscilloscope Kit, OSC482 PC 2 Channel Bandwidth 20Mhz Sampling Data 50M wit Virtual Digital Handheld Oscilloscope Set

Feature

USB2.0 high speed transmission, USB power, no additional power supply, plug and play
Adopt new structure, more stable and beautiful, with more reliable compatibility
Support multiple operating systems: support XP,Win 7,win8,win10 and other 32-bit and 64-bit systems, and automatically identify and install drivers on win8.1 and win10 systems
Support HD large screen, software support high DPI screen, excluding VISTA system, there will be no fuzzy situation
Hardware trigger, in all cases of sampling rate can be a single trigger, analysis of occasional aperiodic signal

8. YEAPOOK ADS5012h Handheld Digital Portable Oscilloscope Mini Storage Oscilloscope Kit with 100MHz Bandwidth 500MS/s Sampling Rate 2.4'' TFT LCD Display

Feature

: 100 MHz analog bandwidth,Real-time sampling rate up to 500MSa / s and the price is moderate.
: 2.4'' color TFT- LCD display with 320 x 240 resolution.
: Ultra small form factor easy to hand-held and carry. it's always ready when you need it.
: The built-in 64 MB flash storage for up to 2000 waveform images.The storage process is easy and fast.
: Auto/Normal/Single 3 Trigger modes,it is easy to capture instantaneous waveform.

9. HANMATEK 110mhz Bandwidth DOS1102 Digital Oscilloscope with 2 Channels and Screen 7 inch / 18 cm, TFT-LCD Display, Portable Professional Oscilloscope Kit with 1GS/s Sampling Rate (Not for Medical Use)

Feature

1: 110MHz bandwidth, 1GSa / s real-time sampling rate, dual channel, 2ns / div 1000s / div time base range; storage depth (record length of each acquired waveform) is not less than 10K sampling points; stored waveform is not less 16 groups; with U disk storage function; USB Device & Host interface;Host software download address: http://www.hanmatek.cn/en/index.php?s=/List/index/cid/28.html
2: 7 inch TFT (True Color) LCD screen, 65535 colors, resolution 800 480 pixels; support cursor measurement, cursor mode is not less than voltage difference ( V), time difference ( T), time difference & voltage difference ( V), four modes of automatic cursor;
3: With automatic range function, support horizontal, vertical, single waveform / multi-waveform tracking; probe attenuation multiples of 1X, 10X, 100X, 1000X, four kinds;
4: Built-in 6-bit hardware frequency meter, which can measure 2Hz ~ 20MHz; with current measurement function, measurement range: 100.0mA / V ~ 1KA / V;
5: It has 30 kinds of automatic measurement functions, and can customize the measurement menu; it has the waveform interception function, and can be seamlessly connected with the same brand signal generators. Support LABVIEW communication, support secondary development. Ultra-portable oscilloscope with a volume of 301 x 152 x 70 mm, ultra-thin body design, thickness of 70 mm, weight of 1.1 kg, saving more desktop space, ultra-quiet design, power consumption not higher than 18W

10. Kecheer Rechargeable Digital Oscilloscope, Ultra Thin 2 Channels 100MHz Band Width 1GSa/s Sampling Rate Oscilloscopes with 7 Inch Color TFT Display LCD Touching Screen, 800480 Resolution

Feature

Touch ScreenFully fit 7 inch 800 * 480 resolution color TFT LCD display with bright colors and high contrast. FFT display function, can analyze the spectral characteristics of the signal.Capacitive touching screen, the same as the touching mode of modern mobile tablet, is not a resistive touching screen with ancient nail operation. Screen brightness adjustment.Background grid brightness adjustment.
Multi-functionalHigh measurement voltage range, 1X can measure 0~40V, 10X can measure 0~400V100X can measure 0~4000V. Up to 12 parameters measurement: VPPVPVmaxVminVavgVrmsFrequentDuty+Duty-Time+Time-Period.Cursor measurement function, it is convenient to manually measure the period and frequency and voltage.Complete triggering function (single, normal, automatic).At any time, the waveform display (pause function) is frozen.
One-button AutoThis 2 channels oscilloscopes is equipped with high efficiency One-button AUTO.One-button waveform storage and screenshot.Built-in 1GB storage space, can store up to 1000 screenshots + 1000 sets of waveform data.Powerful waveform picture manager supports thumbnail browsing, viewing, detailed viewing, page turning, deletion and waveform zooming in, zooming out, moving, etc.
Humanized UseThis usb oscilloscope is equipped with a USB interface, which can be connected to a computer to share its screenshots with the computer, which is convenient for secondary analysis.Lissajous figures graphic display function can be used to determine the amplitude, frequency, and phase contrast of two groups of signals.Ultra thin, easy to carry.
RechargeableBuilt in 6000mAh rechargeable lithium batteryfully charged for 4 hours of continuous use at the highest screen brightness.Memory compression technology, waveform refresh screen does not flicker.Intelligent anti-burn1X can withstand up to 400V withstand voltage.100MHz analog bandwidth @ 1GSa/s sampling rate (1X=5MHz10X=100MHz)

Conclusion

By our suggestions above, we hope that you can found the best oscilloscope kit 2 channel for you. Please don't forget to share your experience by comment in this post. Thank you!