If you looking for mp3 arduino board then you are right place. We are searching for the best mp3 arduino board on the market and analyze these products to provide you the best choice.
Best mp3 arduino board
Rank
Product Name
Score
Related posts:
Best mp3 arduino board reviews
1. KOOBOOK 2Pcs Voice Playback Module MP3 Trigger Player Board SD/TF Card for Arduino
Feature
Smart voice module,integrated IO trigger, UART protocol control, One_line single-bus protocol control.Standard MP3 and other 7 operating modes setting by DIP switch.
Drive 4~8, 3~5W.
Speaker by a 5W class D audio amplifier on board.
Support MP3,WAV decoding; Support TF card for maximum 32G downloading music files directly by micro USB connector.
2. PEMENOL Voice Playback Module Music Player Voice prompts Voice Broadcast Device MP3 Trigger Amplifier Class D 5W 64MBit Flash for Arduino
Feature
Support MP3 and WAV Decoding Format: onboard 64Mbit (8M bytes) Flash storage, can be connected to a computer via a USB cable to update Flash storage audio filesUART Serial Port Control Voice Broadcast Function: With control playback, pause, song selection, volume addition and subtraction functions. Up to 65535 tracks can be selected, and the baud rate is 9600 bit/s
24-bit DAC output, dynamic range supports 90dB, signal-to-noise ratio supports 85dB
Support 64Bbit(8Mbyte) Flash memory, no memory card required
Built in 5W Class D amplifier circuit and can directly drive 4ohm 3~5W speaker. for more details, please read the user manual.(Control + F to search it)
3. Aideepen 5PCS DFPlayer Mini Mp3 Player Board Module Voice Decode Board Support TF Micro SD Card U Disk Audio Music
Feature
UpgradeThis is a MP3 Player Audio Voice Module, can be connected directly to the speaker.GD3200B chip replacement old YX5200 (Compatibility upgradeSupported Sampling Rates (kHz):8/11.025/12/16/22.05/24/32/44.1/48;24 -bit DAC output, support for dynamic range 90dB , SNR support 85dB.
The DFPlayer perfectly integrates hard decoding module, which supports common audio formats such as MP3, WAV and WMA. Besides, it also supports TF card with FAT16, FAT32 file system.
This Module with battery power supply, speaker, keypad can be used alone, or through the serial port control, as the Arduino UNO or any microcontroller with a serial port module.
A variety of control modes, I/O control mode, serial mode, AD button control mode.-->If you need any questions, please feel free to contact us.
4. HiLetgo 2pcs mp3 Player Mini MP3 Player Audio Voice Module TF Card U Disk Board for DFPlayer Audio Voice Music Module
Feature
supports sampling rates (KHz): 8/11.025/12/16/22.05/24/32/44.1/48MP3 Player Audio Voice Module
5. Anmbest 5PCS YX5200 DFPlayer Mini MP3 Player Module MP3 Voice Decode Board Supporting TF Card U-Disk IO/Serial Port/AD for Arduino
Feature
The DFPlayer perfectly integrates hard decoding module, which supports common audio formats such as MP3, WAV and WMA. Besides, it also supports TF card with FAT16, FAT32 file system.Supported sampling rates (kHz): 8/11.025/12/16/22.05/24/32/44.1/48; 24 -bit DAC output, support for dynamic range 90dB , SNR support 85dB.
Through a simple serial port, you can play the designated music without any other tedious underlying operations.
A variety of control modes, I/O control mode, serial mode, AD button control mode.
6. HiLetgo TF Card U Disk Play MP3 Decoder Player Module with Audio Amplifier Audio Decoding Player Module Micro USB 5V Power Supply
Feature
With high quality, onboard 2W single channel power amplifier.Convenient to wire and refit; 4 buttons on the board for setting operation.
Support MP3 format, playing power on automatically, LED indocator light when module is working.
Mp3 lossless decoders power amplifier Mp3 player module Mp3 decoder board support TF card and USB.
Support TF Card (mobile phone memory card), U disk playback mode With the speaker terminals without welding.
7. MakerHawk 2pcs DFPlayer Mini MP3 Player Module Compatible with UNO R3 for Arduino Audio Voice Decode Board Support TF Card and U Disk
Feature
The DFPlayer Mini MP3 Player For Arduino is a compact and inexpensive MP3 module can be connected directly to the speaker. Product usage guidelines are provided in the product description.The module can be used as a stand alone module with attached battery, speaker and push buttons or through the serial port control, used in combination with an Arduino UNO or any other with RX/TX capabilities.
Through a simple serial port, you can play the designated music without any other tedious underlying operations. The module perfectly integrated hardware decode MP3, WAV, WMA.
IO control mode, serial mode, AD key control mode are available to choose. A variety of applications such as Vehicle navigation voice, multichannel voice alarm, automatic alarm for equipment failure, timed broadcasting.
The software supports TF card driver, maximum support 32G of the TF card; support FAT16, FAT32 file system; support 32G of U disk; 64M bytes NORFLASH.
8. 3PCS Mini MP3 Player Audio Module MP3 Voice Decode Board TF Card U Disk IO/Serial Port/AD Board DFPlayer Audio Voice Music Module for Arduino
Feature
Item: MP3 Player Audio Voice Module.The DFPlayer perfectly integrates hard decoding module, which supports common audio formats such as MP3, WAV and WMA. Besides, it also supports TF card with FAT16, FAT32 file system.
Supported Sampling Rates (kHz): 8/11.025/12/16/22.05/24/32/44.1/48; 24 -bit DAC output, support for dynamic range 90dB , SNR support 85dB.
You can play the designated music without any other tedious underlying operations by a simple serial port.
Control modes: I/O control mode, serial mode, AD button control mode.
9. Yeeco MP3 Decoder with Amplifier, Lossless MP3 Decoder Board with Bluetooth Module Dual Channel Wireless MP3 Decoder Player Module DC 5 V Power Supply
Feature
Lossless Mp3 Decoders Board Power Amplifier Mp3 Player Audio Module is with 5V DC input, connect with universal micro USB for power supply, convenient to connect with common mobile phone charger or power bank; 5v Bluetooth board also capable to weld with DC 5V power supply, +5V to positive and GND to negativeYeeco Board TF Card USB Decording Input Headphones Audio Amplifier; DIY Speaker with 3.5mm audio output jack, super easy to enjoy audio with 3.5mm earphones; Wireless audio receiver board able to use with 3.5mm audio input amplifier, wonderful to add bluetooth function to your amplifier or amplifier board, supported 15m receiving distance
This bluetooth mp3 decoder board decoding player module is with aux and bluetooth chip, mini receiver module compatible with TF card, USB and bluetooth; Easy to connect with bluetooth audio receiver board with smartphones, tablets and other electronics
Mp3 decoder board bluetooth with controlling buttons, contain Mode, Play, Next, Back and EQ button; Mode for adjusting input source, EQ for adjust normal, class, jazz, rock, bass, pop, you can choose your favourite sound effect
The mp3 decoder board with bluetooth module DC 5V Support TF Card USB is suitable for car, phone, amplifier, home stereo theater, also ideal to DIY audio system
10. XISAOK UART Serial MP3 Music Player Module with Speaker Monaural Amplifier Board for Arduino MP3 Music Player Module
Feature
Our product design is unique, not only beautiful but also practical.The module is a kind of simple MP3 player device which is based on a high-quality MP3 audio chip. It can support 8k Hz ~ 48k Hz sampling frequency MP3 and WAV file formats.
There is a TF card socket on board, so you can plug the micro SD card that stores audio files. MCU can control the MP3 playback state by sending commands to the module via
UART port, such as switch songs, change the volume and play mode and so on. You can also debug the module via USB to UART module. It is compatible with Arduino/AVR/ARM/PIC.
Our Brand is dedicated to provide high standard productswe have confidence in our products and provide after sale support,if you have products quality issues, please contact us.
