Best lathe headstock spacers for 2020

When it comes to choosing your lathe headstock spacers, there are hundreds of different choices. In our review, weve considered all the various features youll need to know before buying the best lathe headstock spacers. We hope that through this article, with our comparison table, in-detail review of each product can help you decide which one is your best lathe headstock spacers.

Best lathe headstock spacers

Related posts:

Best lathe headstock spacers reviews

1. Spacer block kit

Feature

Raises headstock 1.25 to allow turning of larger parts on lathe
Increases maximum size that can be turned to 6 over bed or 4-3/8 over table
Includes 1.25 longer riser rocker tool post to accommodate increased center height

2. Headstock spacer block

3. PSI Woodworking PKMSTS2 Live Tailstock Mandrel Saver #2 Morse Taper

Feature

Unique design to support the end of your penturning mandrel
Provides no pressure on the tailstock end of the mandrel shaft thus eliminating any bending or vibration
There is no longer a need for spacer bushings
Will work with all mandrels with a diameter of 0. 245" or less
Compatible with lathes that accept #2MT accessories in tailstock

4. #2MT Pen Turning Mandrel and Deluxe Barrel Trimmer Kit

Feature

#2MT pen mandrel with mandrel saver live center
Includes 4 bushings for standard slim line pens, accepts standard 7mm bushings for other profiles
Super easy set up - tightening the tailstock locks the mandrel!
Requres #2MT in both head stock and tail stock
Kit comes with barrel trimmer with 7mm, 8mm, 3/8", & 10mm shafts and 3/4" squaring cutter

5. PSI Woodworking Products LCENTSET 7-Piece Multi Spur Drive Center Set With A 1-Inch by 8 TPI Mount

Feature

Includes (3) 4-prong Spur Centers, (3) Multi-tooth Super Centers, (1) 1" x 8tpi threaded Center Carrier, and (1) set of Tightening Levers
Both center types come in 5/8", 1", and 1-1/2"
All centers have a spring loaded pin for easy mounting and removal of your work-piece
Thread the 1" x 8tpi Center Carrier onto your lathe's headstock spindle for easy insertion and removal of all the centers
Comes in wooden case for storage

6. Sherline 1299 - Extended Headstock Spacer

Feature

Allows the extension of the Sherline headstock
For use on Sherline Mills
NEW from Sherline!

7. PSI Woodworking PKMS2SET Pen Mandrel Saver Package, 2 Morse Taper (2MT)

Feature

Includes 7mm drill bit, (5) 7mm bushings, #2MT mandrel saver tailstock center, & #2MT basic mandrel.
Perfect system to avoid bent mandrel shafts and ruining the point on your live center.
System adapts to the length of your project.
No need for the knurled nut that sometimes gets lost, misplaced, or stripped.
Great for turners of all Skill levels.

8. PSI Woodworking PKMJAM Mandrel Jam Chuck System with No.2 Morse Taper

Feature

Use for mounting and fastening wooden spindles for turning the outer surfaces
Ideal for turning Peppermill blanks, Kaleidoscope blanks, and any other project blank that has a completely drilled-thru hole of 1", 1-1/2", or 2"
Includes (1)9" threaded mandrel shaft 3/8"x16tpi , (1)#2MT arbor, (3)sets jam chuck wheels 1",1-1/2",2" diameter, (3)sets washers, (6)lock nuts 3/8"x16tpi, (1)tightening wrench, (4)spacer bushings
For support, lock the tailstock in place with a 60 Degree live center
The system holds a spindle up to 7" long

9. Laguna Tools Revo Lathe 110v 1.5HP 18"/36" Induction 1725RPM Motor w/Variable Speed Frequency Drive Model MLAREVO 1836-110

Feature

Electrical: 1. 5HP, 110 volt, 60 Hz
Motor: induction, 1725 RPM, TEFC
Pfd: Delta S1 variable frequency drive
Phase: 1 Phase input, 3 phase output
Poly-groove drive belt with EZ Access
Recommended breaker: 15 amp
Spring loaded spindle lock
Max outboard swing: 32
Swing over BANJO: 13 1/2
Steel bed: ASTM A36

10. Taytools 465517 Pen Turning Lathe Mandrel Morse Taper MT1 Quick Adjust, Handles Blanks Up to 5 Inches, Overall Length 9 Inches

Feature

The big advantage of this pen mandrel is its ability to easily adjust to different blank sizes
Simple slide the brass compression fitting where you want it and tighten. Inset your blank and tighten the brass knurled nut on the threaded end with finger pressure
Features a true fitting #1 Morse Taper, which promotes a secure fit to the headstock of the lathe
The threaded end works with a live center
Mandrel is .245" in diameter and will handle blanks up to 5 in length. Overall length is 9.

Conclusion

By our suggestions above, we hope that you can found the best lathe headstock spacers for you. Please don't forget to share your experience by comment in this post. Thank you!