10 best exhaust pipe repair sleeve for 2020

It took days of going through more than a thousand customer reviews and conducting expert researches to narrow down the list. Weve included a comparison table below to give you a quick summary of our top 10 exhaust pipe repair sleeve. Its followed by an in-depth review of each exhaust pipe repair sleeve. Hopefully, once you are done reading this article, you will be well informed about exhaust pipe repair sleeve and be able to select the right exhaust pipe repair sleeve for you without any hesitations.

If you looking for exhaust pipe repair sleeve then you are right place. We are searching for the best exhaust pipe repair sleeve on the market and analyze these products to provide you the best choice.

Best exhaust pipe repair sleeve

Related posts:

Best exhaust pipe repair sleeve reviews

1. Versachem 90100 Exhaust/Tail Pipe Repair Kit

Feature

All-steel clamp with a high temperature gasket
Seals and supports leaking exhaust and tail pipes
Helps stop exhaust noise
Adjustable size; fits pipes 1-1/2" to 2-3/4"
Suggested Applications: Exhaust and tail pipes

2. Vibrant Performance 1176 Exhaust Sleeve Butt Joint Clamp

Feature

Heavy Duty Stainless Steel Exhaust Sleeve Butt Joint Clamp for 2.75" O.D. Tubing

3. SunplusTrade 2" x 50' Black Exhaust Heat Wrap Roll for Motorcycle Fiberglass Heat Shield Tape with Stainless Ties

Feature

Package includes one 2 inch X 50 feet Heat Wrap with (pack of 6) 12" Stainless Steel (304) Locking Zip Ties.
The exhaust heat wrap tape can withstand 1400F direct/2000F radiant heat.
High resistance to abrasions, oil spills, temperatures and vibration breakdown
The thermal heat wrap can reduce heat under hood up to 50%
Universal fitment for cars and motorcycles performance parts

4. EVIL ENERGY 2.5 Inch 2 1/2 Butt Joint Exhaust Band Clamp Sleeve Stainless Steel

Feature

Joins 2.5" OD pipe to 2.5" OD pipe, besides, we offer you 4 different sizes and you would better measure before pruchase. These clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight.
Butt joint band clamps is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service.
Distributes the clamping force evenly over the entire 360 to prevent leaks and control material distortion. Easy and less time consuming to install or remove with one bolt. Features T-304 band stainless steel and aluminized steel hardware.
The band clamp is a wide strap of metal, typically stainless, which wraps around the exhaust pipe joint. Our product is a pre-formed ring, also, it is now more commonly used in higher-end aftermarket exhaust systems using slip-fit, because they are relatively cheap, and are reusable without damaging the pipes.
EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service.

5. Roadformer 2.5" Butt Joint Exhaust Band Clamp - Aluminized Steel for 2.5" OD Exhaust Pipe, Muffler, Elbow and Exhaust Tubing Connection

Feature

PREMIUM QUALITY STANDARD 2.5" butt joint exhaust clamp is made in high quality standard, this band clamp is used for 2.5" OD to 2.5" OD exhaust connection
REAL SEALING CAPABILITY - Roadformer 2.5" exhaust band clamp is in 12.9 degree high-strength fastener providing real sealing capability of leak free
INNOVATION TECHNOLOGY - Our Innovation reaction block technology offers great protection without exhaust ends be damaged when fastening, Pre-attached hardware provides fast, easy and accurate installation
DURALITY & RELIABILITY - exhaust clamp band steel is tested over 100 hours salt spray to ensure the great performance in anti-corrosion with superior product quality in durability and reliability
FULL CLAMPING AREA - Designed 360 degree full clamping area to create overall sealing force without distorting exhaust pipe, exhaust muffler ends and exhaust tubing in exhaust system connections

6. RULLINE 2 inch Hardware Exhaust Clamp, Lap Joint+Bolts Band Flanges Clamp Stainless Steel Universal Compatible with Muffler Downpipe Catback Pipe Connector

Feature

Suitable Size: ID: 2"/51mm + Overall Length 3.74"/95mm
Universal Fitment: Fit for 2" ID tube (Perfect for Catback, Exhausts, Mufflers, Downpipes) of most car model such as VW Audi etc.
Brilliant Sealing: Superior Sealing capability prevent Exhaust gas and Noise from Leaking, Tight but without distoring the pipe
Durable Material: Thickened and widened stainless steel for long service life, Anti-Corrosion, Rust prevention, Clean and Bright Apperance
Easy Installation: Easy to install without welding and drilling, Removable and Reusable

7. 2.5" ID to 2.5" ID Universal Exhaust Pipe to Pipe Coupling Coupler Joiner Connector 304 Stainless Khaos Motorsports

Feature

2.5" ID On Each End
4" Length
304 Stainless Steel
Made In Grand Rapids Michigan

8. SPEEDWOW 2.25" Butt Joint Exhaust Band Clamp Sleeve Stainless Steel

Feature

Universal fit for 2.25 Inch OD exhaust pipe/tip/muffler ect. Join your exhaust tubing together quickly without crimps or welding.
No welding design makes butt joint clamp fast, easy and accurate installation. Arc curved face,capability prevent exhaust gas and noise leaks. It is removable and reusable.
The reaction block provides a full 360 equal distribution of stretching forces, prohipiting pipe distortion while complesing a seal round the joined exhaust components.
Application:The butt joint Exhaust Sleeve Clamp suitable for exhaust system, muffler, stainless steel material, not easy to rust, corrosion resistance.
WARRANTY - SPWEEDWOW provide 2.25 inch butt joint Exhaust Sleeve Clamp with 5-month warranty.Any product problem, please feel free to contact us.

9. Exhaust Clamp Stainless Butt Joint 2.5" Band Clamp 2Pcs Exhaust Sleeve 2.5Inch 304 Stainless Steel Pipe Clamp Butt Joint Exhaust Muffler Clamp Band(2Pack)

Feature

HIGH QUALITY ---- Our 2.5inch exhaust clamp are made from high quality 304 Stainless Steel and plating zinc, Can resist the corrosion and rust from water.
Universal fitment.Joins 2.5" OD pipe to 2.5" OD pipe, you would better measure before pruchase.
These exhaust clamps feature unitized construction which minimized part number complexity and maximizes material efficiency for reduced weight.
Easy to install:Butt joint band clamps is a simple, effective way to connect exhaust system components such as pipes, mufflers and catalytic converters. Unique seal and high clamp loads are provided without distorting your exhaust components, allowing the flexibility to disassemble for service.
NOTE: Please check the size of the prouducts pictures,type and shape to make sure the item is the one that you need.If You Have Any Problems ,Take Time To Contact With Us,We Are In 24 Hours Service !

10. 2.5 Inch (2 1/2") Butt Joint Band Clamp Exhaust Sleeve Stainless Steel, 2 Pack

Feature

Inside diameter: 2.5" exhaust clamp.
Suitable for 2.5" exhaust pipe, muffler, and catalytic converters connection.
Stainless steel clamp with great performance in anti-corrosion.
Prevent leaks and control material distortion.
Durable installation without damage to pipe ends or flex hose.

Conclusion

By our suggestions above, we hope that you can found the best exhaust pipe repair sleeve for you. Please don't forget to share your experience by comment in this post. Thank you!