Finding your suitable ender 3 silent board is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best ender 3 silent board including detail information and customer reviews. Let’s find out which is your favorite one.
Best ender 3 silent board
Rank
Product Name
Score
Related posts:
Best ender 3 silent board reviews
1. SOVOL Creality Ender 3 Pro Upgraded Silent Board Motherboard V4.2.7 with TMC2225 Driver Marlin 2.0.1 for Ender 3/ Ender 3 V2/ Ender 3 Pro/Ender 5 (Customized and Non-Standard Matching)
Feature
Super quiet (Customized and Non-standard matching). Compatible with Creality Ender 3, Ender 3 Pro, Ender 5 3D printer. PLEASE NOTICE: It only preinstalls the Ender-3 Pro firmware, if you want to install it in your Ender 3 or Ender-5, need to flash the Ender 3 / Ender-5 firmware.If you need the firmware, please contact us freely.Driver: TMC2208 drivers. Marlin 1.1.8 and Bootloader installed,the firmware can be modified by ARDUNO with USB cable.
Thermal runaway protection is enabled. The Board is Optimized by Circuit, effectively solve the Heating Problem.
Eeay to Operate: With USB Port,can be Worked With E/Z/Y/X Axis Motor. Firmware 1.1.8 comes pre-installed on this board. Suitable for Ender-3/Ender-3 Pro.
Any issues or questions about the product please feel free to contact us via Amazon message at any time. We have professional technical Team to provide technical supports for you as soon as we can.
2. Creality V4.2.7 Upgrade Mute Silent Mainboard for Ender 3 Customized Silent Board, Ender 3 Silent Mother Board
Feature
Suitable for Ender 3, Silent function Customized and Non-standard matching.The TMC2225 driver is super quiet.Main control chip is STM32F103RET6.
Thermal runaway protection is enabled. This mute mother board is optimized by circuit, effectively solve the heating problem.
Support 24V input voltage.With USB Port,can be Worked with E/Z/Y/X Axis Motor.
3. Creality 3D 32bits New Version Upgrade Silent Mainboard Motherboard with TMC2225 Stepper Motor Driver V4.2.7 Version for Ender 3/Ender 3 pro/Ender 3X
Feature
New Version: This is the newest Silent Controller board for Creality 3D printersDriver:TMC2225 drivers and Boothloader installed the firmware can be modified by ARDUNO with USB cable.
Thermal runaway protection is enabled.The Board is Optimized by Circuit ,effectively solve the Heating Problem.
Easy to Operate:With USB Port,can be Worked with E/Z/Y/X Axis Motor Fimware 1.1.8 comes pre-installed on this board.Suitable for Ender-3 /Ender3 Pro.
4. Official Creality New Upgrade Motherboard Silent Mainboard V4.2.7 for Ender 3 Customized and Non-Standard Matching,Ender 3 Silent Mother Board
Feature
Creality new release silent motherboard V4.2.7 32bit, compatible with Ender 3.Super quiet by TMC2225 drivers , Bootloader installed,copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process., easier to flash the firmware.
Thermal runaway protection is enabled. The Board is Optimized by Circuit, effectively solve Heating Problem.
Firmware comes pre-installed, pre-configured for the Ender 3, makes it totally plug & play.
This silent mainboard preinstalls the Ender-3 firmware. If you want to install it in your Ender 3 Pro/Ender3 v2/ Ender-5, need to flash the Ender 3 Pro/Ender 3 v2/Ender5 firmware.
5. Creality Ender 3 / Pro / V2 Plug and Play 4 Color Display Screen + v3.1 BL Touch + 4.2.7 32Bit Silent Board + Runout Sensor All-in-One Upgrade Kit for Auto-Bed Leveling + Improved UI on Stock Printer
Feature
Please contact F1rst Layer DIRECTLY for all your technical support needs! We are proud to announce the ultimate Ender series Plug And Play upgrade kit. Pairing a BL Touch, 4.2.7 Silent 32 Bit control board, Ender 3 V2 color display screen, filament runout sensor, and aluminum handle. All designed to work out of the box with F1RST LAYERS custom firmware flashed from the factory. F1rst Layer is an authorized distributor of all parts included in this kit. Update and download links in descriptionThe BL Touch is an incredibly accurate and reliable auto mesh bed level sensor that probes individual spots for differences in Z height on any print surface with incredible accuracy to 0.005mm. This is especially great for users with small imperfections or warping in their print surface as manual leveling will never be able to account for these variables. Includes 1.5m extension cable for neat cable management solutions.
The Ender 3 V2 color display screen can now be used on Ender printers thanks to the new 4.2.7 control board. This screen is running the aftermarket Jyers UI with dozens of features over stock Creality firmware for the V2 screen which they have not updated since the day it was released. This means it is INCOMPATIBLE with stock Creality firmware. New features include mesh bed leveling, extended UI settings to change color of any text on the screen, automatic filament loading and MORE!
This is the newest version of Creality's 4.2.7 32Bit silent control board with TMC2225 Trinamic stepper drivers which greatly reduce the sound of the stepper motors during use. This new 32 Bit version has more memory to store more functions and features of Marlin firmware like thermal runaway protection, resume print, and many others. It also comes with a bootloader pre-installed to for easy firmware updates. The 4.2.7 also comes built in support for all the parts in this kit for easy install.
Also included in this kit are a filament run-out sensor and a CR-6SE handle for more convenient moving and handling of your printer. The filament run-out sensor is installed in front of your extruder and ensures that the printer has not run out of filament. Should the roll of filament run out in the middle of a print, when then proper firmware is flashed, the filament sensor will detect it, and your printer can pause the print and wait for you to replace the filament and resume the print.
6. Haosegd 3D Printer 32-bit V4.2.7 Silent Motherboard, 24 V Input Mainboard for 3D Printer Creality Ender-3/3 pro Ender V2/Ender 5 Aluminum Low Consumption 4.01 x 2.81 in 12V Output
Feature
The mute motherboard is installed on the 3D printer, so there will be no noise during printing. It allows you to operate with peace of mind even when your family is resting.The mute motherboard is suitable for Ender-3 / 3Pro / 3V2 / 5 / 5Pro and other models. 3 Pro / 3V2 needs to flash the firmware, 5/5Pro needs to adjust the voltage to flash the firmware. The firmware needs to be pre-installed on the work board of the printing system in advance.
Our product has installed the driver for you, and the firmware can be modified by ARDUNO using a USB cable, which is very convenient.
Our products enable thermal runaway protection. When the temperature is out of control, the printer will stop heating and automatically stop working, which can well protect your work and equipment safety.
The mute motherboard is easy to operate, comes with a USB interface, and can be used with E/Z/Y/X axis motors. Allows you to apply as soon as you receive the goods.
7. Creality Ender 3 / Pro / V2 / 5 Plug and Play Deluxe LCD Color Touch Screen with 4.2.7 32-Bit Silent Control Board and Silent Fan Upgrade Kit - Improved UI and Faster Operation (Now Open Source)
Feature
This Ender 3 touch screen is now FULLY open source thanks to a partnership between First Layer with Insanity Automation. The ONLY open source Ender touch screen on Amazon fully Plug-And-Play from the factory flashed with our custom firmware for more features than ever. NEWLY SUPPORTED: dual gear extruder, filament sensor, mesh bed leveling features, change filament function, screen brightness and standby timer, built in PID tuning, silent touch screen mode, direct drive extruders and more!A custom DWIN_SET makes this the first open source Ender series touch screen on the market to be compatible with any Ender 3 / V2 / Pro / 5 / 5 Pro on the market. Along with more added features than any other touch screen available today, this is THE best version of this product available on Amazon right now. With this new open source build, not only have critical bugs preventing users from even turning on their printers been fixed, but more printers than ever can use this touch screen
This is the newest version of Creality's 4.2.7 32 Bit silent control board with authentic TMC2225 Trinamic stepper drivers which greatly reduce the sound of the stepper motors during use. The 4.2.7 control board comes flashed with our custom Marlin firmware for the Ender 3 Pro. This entire hardware swap will take less than 1 hour and quickly turns your stock Ender into a touch operated printer in just one upgrade as well as add dozens of features over stock Creality firmware!
The upgraded silent fan included can be placed on the hotend or the control board however since the hotend fan is running at all times, it is suggested to be installed there. To avoid needing to re-route all the wires through the wire harness, you can cut the wires from the old fan and splice them onto the new silent fan for a pain free swap!
First Layer have partnered with Insanity Automation to hack this touch screen and unlock its full open source potential! This kit is completely Plug-and-Play and enhance your Ender 3 with previously unavailable features, while also allowing for the BL Touch upgrade in the future if you want to install it. Please note this Touch screen is flashed with a custom DWIN_SET folder developed by Insanity Automation for First Layer. Stock Creality firmware for the 427 board WILL NOT work with this screen
8. Creality Ender 3 / Pro / V2 Plug and Play CR Touch with 1.5m Extension Cable and 4.2.7 Silent Mainboard Accessories Upgrade Kit for Smart Auto Bed Leveling with TMC 2225 Drivers and 32Bit Processor
Feature
This upgrade kit comes with Plug and Play functionality for any Ender 3 / Pro. Both the CR Touch and this board should be installed and used together. This entire hardware swap will take less than 1 hour. ENDER 3 V2/5 USERS MUST UPDATE THEIR FIRMWARE. THIS FIRMWARE can be found by following the instructions on the insert card that comes with your product and updating the firmware takes 2 minutes. Quickly turn your stock Ender into a multi-featured, high-end printer in just one upgrade.The CR Touch is an incredibly accurate and reliable auto-mesh bed leveling sensor that probes individual spots for differences in Z height on any print surface such as glass, aluminum, PEI, BuildTak with incredible accuracy to 0.005mm. This is especially great for users with small imperfections or warping in their print surface as manual leveling will never be able to account for these variables. Includes 1.5m extension cable for neat cable management solutions and a silent fan with a 1m cable.
This is the newest version of Creality's 4.2.7 32 Bit silent control board with original TMC2225 Trinamic stepper drivers which greatly reduce the sound of the stepper motors during use. The drastic difference will be noticed immediately as the printer becomes inaudible from any other room in your home or apartment. This new 32Bit version has more memory to store more functions and features of Marlin firmware like thermal runaway protection and resume print, and many others.
Crealitys New 4.2.7 silent control board comes with extra space to add further upgrades such as a CR Touch (included), a BL Touch, a filament run out sensor, a V2 color screen, an Ender series touch screen and many other accessories. All the firmware for these accessories is on our google drive and the link is on the insert card that comes with this product. Because the board comes with the bootloader installed, no other tools are needed to complete the install of all of these additions.
F1RST LAYER is an authorized distributor of Creality. Amazon customer support is NOT suited for providing the Tech Support needed for this 3D Printing product. PLEASE CONTACT F1RST LAYER DIRECTLY for the Tech support you need, done right, the F1RST time! Customer satisfaction is our main priority so if you have any questions about this product, please contact us and we will be happy to assist you. MAKE SURE you use the board wiring diagram in this listings photos when installing!
9. Creality Ender 3 v2 New Motherboard Silent Mainboard V4.2.7 with TMC2225 Driver Marlin 2.0.1 for Ender 3 v2/ Ender 3/ Ender 3 Pro/Ender 5 3D Printer
Feature
Super Quiet. Compatible with Creality Ender 3 v2, Ender 3 Pro, Ender 3, Ender 5 3D printer. PLEASE NOTICE: It only plug and play for Ender-3 v2. If you want to install it on Ender-5, please flash Ender-5 firmware. You can download firmware from Official website.Driver - TMC2225 driver & Creality V0.0.6 firmware ( based on Marlin 2.0.1) for V4.2.7 board. Bootloader has been preinstalled.
Update Firmware - Please copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process.
Thermal runaway protection is enabled. The Board is Optimized by Circuit, effectively solve the Heating Problem.
Any issues or questions about our product please feel free to contact us at any time. We have professional technical Team to provide technical supports for you as soon as we can.
10. Official Creality Ender 3 Upgraded Silent Board Motherboard V4.2.7 with TMC2225 Driver Marlin 2.0.1 for Ender 3/ Ender 3 V2/ Ender 3 Pro/Ender 3 Max/Ender 5
Feature
Super QuietThe silent mainboard can reduce stepper motor noise. TMC ultra-quiet motor drive chip, ultra-quiet system design, so that the machine is always running at low decibels (<50dB).Widely ApplicationCompatible with Creality Ender 3, Ender 3 Pro, Ender 3 V2, Ender 3 MAX, Ender 5,Ender 5 Pro 3D printer. PLEASE NOTICE: It only plug and play for Ender-3. If you want to install it on other machine, please flash the machine firmware. You can download firmware from official website.
DriverTMC2225 driver & Creality V0.0.6 firmware ( based on Marlin 2.0.1) for V4.2.7 board. The bootloader has been preinstalled.
Update FirmwarePlease copy the firmware file to a formated SD card with no other files in it. Turn off the printer and unplug the power cord. Insert the SD card & power cord, and turn on the printer. Wait 10s to complete the firmware updating process.
After Sale ServiceAny issues or questions about our product please feel free to contact us at any time. We have professional technical Team to provide technical supports for you within 24 hours.
