Top 10 dfrobot beetle for 2020

Shopping for the best dfrobot beetle is about as tricky as finding your soulmate. You not only think about quality, price but also need to find where to buy dfrobot beetle. Don’t worry any more! We spend many hours to review and compare dfrobot beetle to make the short list for you. Let’s check which product is suitable with you.

Best dfrobot beetle

Related posts:

Best dfrobot beetle reviews

1. Gikfun USB Nano V3.0 ATmega328 CH340G 5V 16M Micro-Controller Board for Arduino (Pack of 3pcs) EK1620x3

Feature

Operating Voltage(logic level):5V,Support USB download and Power
Please wear anti-static gloves or bracelet when operate electronic products.Please keep it in anti-static bag when not use it. Please keep it out of reach of children.
Don't use aged usb cable or aged circuit board to connect Nano V3.0 Board.Pull down the usb from computer when no need to upload and download procedures.
Suit for people above 18 year's old with 1 year electronic diy experience.Or use it under the guidance of electronic specializer
The product is used for learning and test Code.It's Prohibited for any other purpose.

2. Dfrobot Bluno Beetle

3. Beetle BLE - The Smallest Microcontroller for Arduino Bluetooth 4.0 (BLE)

Feature

DFRobot Bluno series is an Arduino-compatible Bluetooth 4.0(BLE) hardware solution designed by makers,and for makers. All Bluno products are Bluetooth 4.0 ready,and enjoy features such as wireless programming,smart App controlling,long communication range,and plentiful periphery modules.
The Beetle Ble is an Arduino Uno based board with bluetooth 4.0 (BLE)
It is probably the smallest Arduino BLE board in the market
ATmega328@16MHz / Bluetooth Low Energy (BT 4.0) / Micro USB port. Download User Guide on this page for more information. (Technical Specification - User Guide)
Super Compact Size / Support Wireless Programming. Any technical issues after purchase please contact with our tech-support team: [email protected]. Product wiki >>> https://wiki.dfrobot.com/Bluno_Beetle_SKU_DFR0339

4. Beetle - The Smallest Microcontroller for Arduino

Feature

Beetle is a extremely the smallest Arduino leonardo board. It derives its core notion from minimalism without compromising functionality.
It comes with Atmel AtMega32u4 ( datasheet) @16MHz clock time and has expanded amounts of interfaces: 10 digital pins, 5 analog pins and 4 pwn pins.
To further make it user-friendly, it is compatible with Micro USB so that direct programming and testing is no longer a headache. Select "Arduino Leonardo (tools >board > Arduino Leonardo in Arduino IDE), the ATmega32U4 comes preburned with a bootloader that allows you to upload any new code that is applicable to Arduino Leonardo.
As the smallest Arduino Leonardo, it enjoys similar powerful functionalities. Beetle aims to solve problems of low-cost controller, ease-of-using properly, and to provide a low cost solution for disposable projects, such as DIY projects, workshops, gift projects, E-Textiles and educational.
For students and makers who can not afford too much on hardware purchasing, Beetle can be a great solution for them. Any technical issues after purchase please contact with our tech-support team: [email protected]. Product wiki >>> https://wiki.dfrobot.com/Beetle_SKU_DFR0282

5. DFRobot Bluno Beetle Shield

6. DAOKI 5PCS Digispark Kickstarter ATTINY85 Micro USB Development Board for Arduino

Feature

Support for the Arduino IDE 1.0+ (OSX / Win / Linux)
Power via USB or External Source - 5V or 7 -35V (automatic selection)
On-board 500ma 5V Regulator
Built-in USB(and serial debugging)
6 I/O Pins (2 are used for USB only if your program actively communicates over USB otherwise you can use all 6 even if you are programming via USB)

7. ELEGOO Nano Board CH 340/ATmega+328P Without USB Cable, Compatible with Arduino Nano V3.0 (Nano x 3 Without Cable)

Feature

You could download the driver of Elegoo Nano V3.0 at: http://bit.ly/2jKlJMO
The Nano is using the chips ATmega328P and CH340, not FT232 as official Arduino, so pls. use the driver from above link.
It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper.
Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other).
The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.

8. Aideepen Beetle Virtual Keyboard BadUSB Atmega32U4-AU Module Micro Development Expansion Board for Arduino Leonardo UNO R3

Feature

Microcontroller: ATmega32u4
Operating voltage: 5V DC
Flash memory: 32 KB (ATmega32u4) of which 4KB used by bootloader
SRAM: 2.5 KB (ATmega32u4)
EEPROM: 1 KB (ATmega32u4)

9. DFRobot Gravity IO Expansion Shield for LattePanda

Feature

This Gravity I/O expansion shield, which is made for LattePanda, breakouts all GPIO pins to make it compatible with standard Arduino device and no interruption with other ports on LattePanda
Each pin has VCC and GND power port, compatible with Gravity-3Pin Color coded interface, supports hundreds of sensors and modules
SHIPPING LIST: Gravity IO Expansion Shield for LattePanda x1
Please download the User Guide for schematic (Technical Specification - User Guide)
Note: This Gravity I/O expansion shield is made for LattePanda V1 (NOT compatible with LattePanda Alpha & Delta)

10. Nano V3.0, Nano Board ATmega328P 5V 16M Micro-Controller Board Compatible with Arduino IDE (Nano x 3 with USB Cable)

Feature

Original ATmega328P CH340 chip is used. Improved new version CH340G Replace FT232RL.
LAFVIN Nano V3.0 card is 100% compatible with the Nano card, and fully compatible with Windows, Mac and Linux operating system.
Works the same as original Nano, runs perfectly on programming software.
Using Atmel Atmega328P-AU MCU, Support ISP download; Support USB download and Power.
LAFVIN Nano CH340 controller is a compact board similar to the R3 board, smaller and breadboard-friendly than Diecimila.

Conclusion

All above are our suggestions for dfrobot beetle. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using dfrobot beetle with us by comment in this post. Thank you!