Top cts pots 500k long shaft for 2021

If you looking for cts pots 500k long shaft then you are right place. We are searching for the best cts pots 500k long shaft on the market and analyze these products to provide you the best choice.

Best cts pots 500k long shaft

Related posts:

Best cts pots 500k long shaft reviews

1. Set of 4 (4X) CTS Custom 450S 500K LONG Split Shaft Audio Taper Potentiometers - 450G

Feature

CTS TAOT Custom 500K Long Shaft Pot - 10% Tolerance - Custom Manufactured for The Art Of Tone (TAOT) by CTS
3/4" Height X 3/8" Diameter Bushing, 24 Tooth Fine Spline .236" Diameter Shaft
Audio Taper suitable for both Tone & Volume
High Quality Brass Bushing & Shaft
PLEASE NOTE! 1). Not suitable for import guitars. 2). A long shaft pot is not a drop in fit. You need to use the second hex nut to set the height of the shaft through the body. These pots are for use in U.S. made guitars, and generally with guitars having a control plate.

2. Bourns 500K Long Split Shaft Audio Taper Low Friction Potentiometers Set of Four (4X) & Pair of Orange Drop Capacitors

Feature

SET of 4 500K LONG Split Shaft Audio Taper Pots - 3/4" bushing
INCLUDES pair of .022uf@400v Orange Drop Polypropylene Capacitors
Low Friction Rotation
Each Pot comes with hardware - 2X Nut and 2 X washers
18 Tooth Course Spline Shaft

3. CTS 500K TAOT CUSTOM LONG Split Shaft Audio Taper Pot - 1X

Feature

CTS TAOT Custom 500K Long Shaft Pot - 10% Tolerance - Custom Manufactured for The Art Of Tone (TAOT) by CTS
3/4" Height X 3/8" Diameter Bushing, 24 Tooth Fine Spline .236" Diameter Shaft
Audio Taper suitable for both Tone & Volume
High Quality Brass Bushing & Shaft
PLEASE NOTE! 1). Not suitable for import guitars. 2). A long shaft pot is not a drop in fit. You need to use the second hex nut to set the height of the shaft through the body. This pot is for use in U.S. made guitars, and generally with guitars having a control plate.

4. ToneShaper Pot Pack for Gibson, 500K Audio, 2 Volume, 2 Tone

Feature

Unique CTS low-torque pots, easier to turn than most CTS Gibson pots!
Top-quality pots in a 4-pack that saves you money!
1/2 bushing lengths get through the top on most rear-rout guitars with threads to spare!
Hardware included. UTS thread sizes may require hole enlargement on non-USA guitars.

5. CTS TAOT CUSTOM 525K LONG Shaft Potentiometers - 10% Tolerance - 500K - Set of 4 (4X)

Feature

Set of 4 CTS Pots - TAOT CUSTOM equivalent or better than 450G series.
10% Tolerance - All Pots Meter between 475K-575K
High Quality Brass Bushing & Brass C-clip reinforced Shaft
3/4" Bushing Height - Hardware includes second hex nut for proper mounting
Custom Manufactured for The Art Of Tone (TAOT) by CTS

6. CTS 500K Push Pull Long Shaft Audio Taper Potentiometers - Pair (2X)

Feature

High Quality CTS Push Pull Pot
Long Shaft (3/4" bushing height), 24-tooth fine spline shaft
Brass bushing and shaft
Double Pull Double Throw allows modification including coil splits, coil taps, phase shifting
Not intended for use with import guitars using metric components

7. CTS TAOT CUSTOM 500K LONG Shaft Pots - 5% Tolerance (All Pots Meter 500K-550K) - Set of 4 (4X)

Feature

SET OF FOUR (4X) - TAOT CUSTOM 500K LONG Split Audio Taper Pots.
5% Tolerance - All Pots Meter between 500K-550K
High Quality Brass Bushing & Brass C-clip reinforced Shaft
3/4" Bushing Height - Hardware includes second hex nut for setting proper mounting height
PLEASE NOTE! 1). Not suitable for import guitars. 2). A long shaft pot is not a drop in fit. You need to use the second hex nut to set the height of the shaft through the body.

8. Bourns 1X 500K Long Split Shaft Audio Taper Low Friction Potentiometer

Feature

Bourns 500K Long Split Shaft Audio Taper Pot - 3/4" bushing
Low friction rotation
Mounting hardware included - 2X nuts and 2X washers
18 Tooth Course Spline Shaft

9. CTS 500K LONG Split Shaft Audio Taper Potentiometer - 5% Tolerance - Bulk Lot of 10

Feature

Bulk Lot of 10 CTS 500K LONG Split Audio Taper Potentiometers Pots
5% Tolerance - All pots meter between 500K - 550K ohm
3/4" Height X 3/8" Diameter Bushing, 24 Tooth Fine Spline Shaft
High Quality Brass Bushing & Brass C-clip reinforced Shaft
Each pot comes with hardware - 2 nuts, dress & lock washer

10. TAOT Wiring Kit for Gibson Les Paul - Long Shaft - CTS 500K Pots Orange Drop Caps

Feature

Four (4) CTS 500K TAOT Custom Long Shaft Audio Pots. Shaft is fine knurled 24-spline and includes nuts, lock & dress washer. (long shaft pot threaded bushing is 3/4"). Both bushing and shaft are made of brass.
Two (2) Orange Drop .022uf/400v Capacitors
One (1) Switchcraft long straight 3-way toggle switch. Cream colored switch tip and deep nut w/nickel finish included
One (1) Switchcraft #11, 1/4" Mono Jack
Five (5) feet vintage-style braided shielded single conductor wire (for wiring switch & jack), approximately one (1) foot of vintage-style 7-strand, pre-tinned, 22 awg black cloth push back wire (for grounding pots) and approximately one (1) foot of 20 awg buss wire (for grounding switch)

Conclusion

All above are our suggestions for cts pots 500k long shaft. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using cts pots 500k long shaft with us by comment in this post. Thank you!