Top challenge targets stand for 2021

Finding the best challenge targets stand suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.

Best challenge targets stand

Related posts:

Best challenge targets stand reviews

1. CTK Precision P3 Ultimate Target Stand

Feature

Accommodates paper and cardboard targets of virtually any size.
Innovative clamping plates provide a firm grip and hold on the furring strips (not provided).
The angled legs provide a stable 4 point stance allowing the stand to be set up on uneven terrain.
Sets up and breaks down in seconds. No tools required!
Made in the USA!

2. RANGETIME Targets- Laser Cut AR500 12x20 x 3/8" Silhouette Target & Full Portable X-Base Stand

Feature

Includes 12"x20" Silhouette & full Portable 2x4 stand with X-base.
Comes apart in seconds for easy transport. Free Shipping!!
Steel shooting targets are laser cut from new high quality 3/8 inch thick AR500 steel plate made in the USA.
Mount kit holds target at a 20% angle to help deflect shrapnel to the ground
These AR500 steel targets work great for most pistol and rifle calibers, including 9mm, 45ACP, .223, 30-06 & 308 as well as most other high powered rifle calibers.

3. Do-All Outdoors - Double Blast High Caliber Spinner Steel Target

Feature

WIDE CALIBER RANGE: Rated for all calibers 9mm - . 30-06 soft nose lead bullets. Pistol calibers at least 30 yards; . 270, . 30-06, etc. at least 100 yards, and . 22-250, 223, etc. at least 200 yards.
CHALLENGE YOUR ACCURACY: Whether shooting alone or competing with a shooting partner, the two targets of varying size allow you to test your accuracy and challenge you to increase your shooting accuracy.
INCREASED LONGEVITY: The Do-All Outdoors Double Blast features reversible targets, allowing for a longer life as you look to sharpen your shooting skills.
ELIMINATES NEED TO RESET: Simply set up and start shooting right away, eliminating the need to reset targets by hand. The high visibility, bright orange steel targets make for an easy target; after being hit, they will spin back into set position.
STURDY CONSTRUCTION: This Do-All Outdoors Double Blast Spinner has a sturdy steel construction and a four leg support design. The products setup dimensions are approximately 8.46 x 4.33 x 21.25 inches with both 3 inch and 4.5 inch target ends.

4. G Outdoors Adjustable Metal Target Stand, Gray, 18-24-Inch

Feature

Powder coated finish
Adjustable for different shooting organizations requirements
4 stake holes for securing in harsh conditions
Adjustable Metal

5. Challenge Targets Hurricane Target Stand

Feature

Adjustable width for law enforcement style or IDPA / IPSC targets (18"-23")
Spring loaded tubes and thumb screws secure 1x2 wood furring strips in both directions
The 1/4" thick x 12" long steel ground stake can be pushed or hammered into almost any terrain
Designed for high wind areas and adverse weather conditions
Spring loaded tubes and thumb screws secure 1x2 wood furring strips

6. IPSC A-C Zone Rifle Target with Static Stand

Feature

Rated for all handguns and rifles with velocities up to 3,000 fps at the target
Minimum distance: Handguns = 10 yards | Rifles = 100 yards
Target plate matches official IPSC target with the D-zone removed (11.81" X 23.62")
Laser cut, 3/8" thick AR500 steel target assembly
Static Stand base is precision fabricated from 1/4" steel with a durable black powder coat finish

7. Challenge Targets Handgun Paddle Target -Torso Front Plate with Static Stand

Feature

Rated for all non-magnum handguns
Laser cut 3/8" thick AR500 Paddle - ships unpainted
Paddle Size = 6" Diameter | Target System Weight = 33 lbs.
Clamp springs and pivot mechanism are fully protected behind 1/4" AR500 torso front plate
Heavy duty Static Stand base constructed of 1/4" steel with durable black powder coat finish

8. HYSKORE 30291 Target Hound Target Stand

Feature

Supports both 1x2" and 2x4" uprights
Rugged steel construction
Full 6 inch deep sockets for uprights
Base dimensions: 19"x19"
Extremely stable and portable

9. RANGETIME Targets- Laser Cut AR550 12x20 x 1/2" Silhouette Steel Shooting Target with Full Portable 2x4 Stand

Feature

Includes AR550 12"x20"x1/2" Silhouette target and 2x4 target mount hanger kit and X-base
Comes apart in seconds for easy transport. Free Shipping!!
Now made with High Quality AR550 steel, stronger and better than AR500. Made in the USA
Mount kit holds target at a 20% angle to help deflect shrapnel to the ground
These AR550 steel targets work great for most pistol and rifle calibers, including 9mm, 45ACP, .223, 30-06 & 308 as well as most other high powered rifle calibers.

10. Full Size Human Silhouette Rifle Target - Static Stand

Feature

AR500 steel human silhouette plate measures 32" tall x 18" wide x 3/8" thick
Heavy duty Static Stand constructed of 1/4" steel with durable black powder coat finish
Rated for most handguns & rifles (velocity < 3,000 fps | energy < 2,300 ft/lbs) at the target

11. Action Target - PT Dueling Tree Steel Target - AR500 Standard Duty

Feature

Train for speed and accuracy under pressure or just have fun competing against friends with the innovative PT Dueling Tree the target made for two.
The PT Dueling Tree has six reactive paddles for interactive training and competitive fun. Designed to swing from one side to the other when hit, the paddles challenge shooters target location and speed under the pressure of head-to-head competition. Because its made of 3/8 AR500 armor steel, the standard PT Dueling Tree is designed for handgun ammunition up to .44 Magnum and .45 ACP.
The PT Dueling Tree consists of a forward leaning center stand which allows gravity to do the work as the six reactive armor steel paddles swing from one side to the other when shot. Because the target is gravity reset and doesnt rely on springs or mechanisms, the PT Dueling Tree gives you reliable results every time. A deceptively simple design also makes it easy to assemble and disassemble.
Specifications: - Height: 5 - Weight: 110 lbs. - Paddles: 6 diameter - Steel Grade: 3/8 AR500 - Handgun Shooting Distance: 10 yards+ (This target is not rated for use with rifle ammunition)*

12. ShootingTargets7 T-Post Bracket Target Mounts - Cheapest Mounting Possible - for Paper and Steel Targets

Feature

SET OF 2 BRACKETS -Easily converts any standard 1-1/4" T Post into inexpensive target stand.
VERSATILE - Use with paper OR steel targets (see pictures on left)
DURABLE -Use one to hold up to 100lbs of targets or 2 for up to 300lbs Galvanized steel so can be left outside and won't rust
BRACKETS ONLY -Price does NOT include 2x4, targets, rubber straps, nor T Post.
NOTE - Old T-posts that are mushroomed at the top from repeated pounding will need to be ground or filed slightly since the mount slides over the top of the T-Post (easily done if needed)

13. High Caliber AR500 3/8" Thick Targets (7" x 12", Silhouette)

Feature

Includes 1 - 7"x12" Silhouette: All AR500 steel is made in the USA and targets are cut in our own facility in the Midwest.
AR500 steel is a special high carbon steel hardened to withstand repeated shots, bullets simply bounce off or vaporize upon impact.
3/8" AR500 steel targets work great for calibers from 9mm through .30-06 including .380, .45, .357 Magnum, 5.56x45mm, .308, and everything in between!
All targets come painted flat black to prevent rust and corrosion. White, Orange, and Red Available upon request, please contact us before your order ships for color changes
Targets come with 5/8" hole and are ready to hang and shoot as soon as you receive them.

14. Challenge Targets Static Stand - IPSC 66% - Rifle Rated

Feature

Rated for all handguns and rifles with velocities up to 3,000 fps at the target
Minimum distance: Handguns = 7 yards | Rifles = 100 yards
11.81" wide x 19.69" tall x 3/8" thick AR500 steel target plate fits over standard wood 2x4 post (not included)

15. High Caliber AR500 1/2" Thick Targets - for Precision Practice (6" Target - 1 Count, Gong)

Feature

Includes: One 6" x 1/2" AR500 Target - All AR500 steel is made in the USA and targets are cut in our own facility in the Midwest.
AR500 steel is a special high carbon steel hardened to withstand repeated shots, bullets simply bounce off or vaporize upon impact. Targets will last forever with proper use.
1/2" AR500 targets easily withstand rifle rounds up to 338. 1/2" are the preferred thickness for rifles used in heavy Club use or Military / Police training. Ensure speed of bullet is below 2900fps at point of impact to avoid pitting.
All targets come painted flat black (for FREE!) to prevent rust and corrosion. White, Orange, and Red Available upon request(for FREE), please contact us before your order ships for color changes
Targets come with 5/8" hole and are ready to hang and shoot as soon as you receive them.

16. ShootingTargets7 F24 Steel Target Stand - Build Any Size Portable Target Stand - 2x4 Legs Fold for Transport

Feature

PORTABLE - Legs fold together with just one wingnut to remove (takes seconds) so you can easily take it to the range or store until needed again
VERSATILE - Now uses 2x4 or 3/4 inch EMT for legs (NOT INCLUDED), Build any size target stand you like, cut 4 legs and a 2x4 center section and you will be shooting in no time
COMPLETE - Includes one pair of 1/4 inch AR500 brackets with Grade 5 Zinc Plated hardware as shown - Included template makes drilling required holes so easy your mom could do it
STABLE - Legs open a wide 70deg so you won't have to stake it down, it won't tip over and can be used on hills
DURABLE - Laser Cut 1/4" AR500 brackets can survive hits and are powder coated for weather resistance 2x4 s are dirt cheap (NOT INCLUDED) to replace if shot up

17. Birchwood Casey Gong Nested Steel Target Stand for 2 x 4

Feature

Nested Steel Target Stand
Perfect For Handing Steel Target Gongs
Requires No Tools To Assemble
Stand Requires One Post (Not Included) To Hang Targets From

18. Highwild 2x4 Target Hanger, Target Mount Bracket - for AR500 Steel Targets - 2 Pack

Feature

Simply slip the hanger over a 2x4 board hang your target and you're ready to shoot!
1/2" Carriage Bolt, Fastening Bolts, Washers, Stopnut, Compression Spring and Hexwrench included.
The target hanger will allow an approx 15 degree forward cant of the target.
Each stake is allowed to mount multiple targets with our 2x4 target hanger. Powder-coated steel for durability.
See other buying options in this listing to build your own stand!

19. 1/2 IPSC 3/8" AR500 Steel Target and T-Post Mount Combo

Feature

Easy set up! Great Combo Price!
Our most durable t-post mount! Mount comes pre-assembled.
The entire mount is made out of premium 3/8" AR500 steel and grade 8 hardware!
1/2 IPSC AR500 target can easily be turned over for a clean shooting surface and to extend the life of your target.
T-Post mount fits over a medium t-post. T-POST NOT INCLUDED.

Conclusion

All above are our suggestions for challenge targets stand. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using challenge targets stand with us by comment in this post. Thank you!