Best bearing extractor set for 2021

There are many reasons you might choose to buy bearing extractor set but it is not easy to find the best suitable bearing extractor set for you. But don’t worry! We did some of the work for you already by researching a few models on the current market. Let’s check following article to find the best bearing extractor set.

Best bearing extractor set

Related posts:

Best bearing extractor set reviews

1. Orion Motor Tech 23-Piece FWD Front Wheel Drive Bearing Adapters Press Kit Puller Set Replacement Installer Removal Automotive Mechanics Tool Kit

Feature

ALL-IN-ONE TOOL KIT: Everything you need for fast & effective front-wheel drive bearing removal and installation. Easily replaces wheel bearings while keeping the steering knuckle and strut assembled on the vehicle.
INCREASE EFFICIENCY: Designed to work with the steering knuckle and strut assembly still on the vehicle, eliminating the need for front end alignment after service while reducing damage to the hub and bearings.
ULTRA-DURABLE: Heavy-duty carbon steel construction with black anodic oxidation coating for ultimate rust-resistant performance.
UNIVERSAL COMPATIBILITY: Works with front-wheel drive hub bearing assembly parts on most front-wheel-drive American domestic and imported cars and small pickup trucks.
PORTABLE CARRY CASE: Packed in a custom carry case with precision-sized storage slots for each component, made of premium ABS to protect and extend the life of your tools.

2. VCT Rear Axle Bearing Remover Puller Slide Hammer Set Remove Semi-Floating

Feature

EASY TO USE: Slide flat end of puller through center of bearing and flat against backside of bearing, then slide washer down the center of the shaft against front side of bearing and tighten the nut on smaller end of puller, then thread a slide hammer (not included) to the puller and slide hammer back and forth until the bearing comes out; The washer captures the bearing firmly to distribute the applied force over the entire bearing and prevent damage
Use the VCT Pneumatic SAE Standard Rear Axle Bearing Puller 3-Piece Service Set Domestic Car Vehicle Bearings Removal Tool Kit to service semi-floating rear axle bearings on your vehicle; These tools make the job simple and prevent damage to your bearings when pulling; Much easier than claw-type axle bearing pullers that slip off and chew up the old bearings; For removal only, not intended for installation
FITS YOUR CAR: Standard SAE sizes work for most American domestic makes and models; Set includes the following sizes to fit main bearing tube 1 inch to 1-7/8 inches, 1-5/16 inches to 2-3/8 inches, and 1-3/8 inches to 2-7/8 inches; Sizes permanently laser-etched on tool for easy identification; Each tool fits a basic slide hammer with a 5/8-inch x 18 thread pitch
EASY STORAGE: Heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization
PACKAGE CONTENTS: Package includes (3) rear axle bearing removers and (1) carrying case for your convenience; Slide hammer not included

3. Orion Motor Tech Blind Hole Collet Bearing Race and Seal Puller Extractor Kit, Slide Hammer Pilot Insert Inner Internal Bearing Removal Tool Set, 16PCS

Feature

DURABILITY, this bearing puller set features high hardness and toughness for optimal performance. Collets made of chrome molybdenum steel ensure rust-proof performance and long-lasting using.
WIDE COMPATIBILITY, comes with various size and type of collets, Blind / Internal /Bearing Puller, this tool set boasts wide compatibility
EASY TO USE, this kit is easy to use, just insert the collect and expand it to fit the hole
PERFECT FOR PROFESSIONAL AND DIY USE, ideal for pulling jobs and will not damage parts in using, perfect for professional and DIY use.
PORTABILITY, comes with a durable storage case, you can neatly collect the tools and easily bring it to anywhere you like.

4. Posi Lock HP-2 Hub Puller Adapter Set, 5-Ton Pulling Capacity

Feature

5-ton pulling capacity hub puller adapter set simplifies removal of many industrial fans, automotive fans, and blower wheels
Steel to help prevent rust and corrosion
Hub collar design quickly removes fans, blower wheels, and bearings by providing a solid connection between the puller and fan hub
Suitable for chillers, freezers, condensers, ice machines, furnace fans, convection ovens, exhaust and ventilation fans, defrost and air conditioning fans
Hub puller set includes 104 puller, HP-30 small collar adapter, HP-40 large collar adapter, HP-70 tip reducer/extender, and a carrying case

5. Supercrazy 16PCS Blind Hole Pilot Bearing Internal Extractor Puller W/Slide Hammer Removal Tool Kit SF0030

Feature

ApplicableBlind hole pilot bearing internal extractor puller w/ slide hammer removal tool kit ideal for pulling jobs,against the bearing for pulling out evenly without damage the parts, and perfect for professional and DIY use.
Constructed of a strong,durable chrome molybdenum steel,the bearing extractor tool is sure to pull even the toughest wheel bearing and bushings from tight positions. This blind internal bearing puller set has a long steel rod and a T-bar handle.
This tools has 10 different collets, split collet type collets are made from chrome molybdenum steel turn and they expand to grip the inner bearing race, fit a wide range of applications.
Feature Include: 1 x sliding hammer, 1 x 2.5 jaws puller, 3 x screw adaptors, 1 x counter stay puller. Thread: M10 x 1.5, M10 x 1.5 to M8 x 1.25, M10 x 1.5 to M6 x 1.0. 10 x Collects (segment grip type): 8-11mm, 12-17mm, 18-23mm, 24-29mm, 30-34mm, 34-38mm, 39-43mm, 44-48mm, 49-53mm, 54-58mm.

6. EWK 16 PCS Blind Bearing Puller Blind Hole Collet Bearing Race Seal Puller Removal Tool Slide Hammer Bearing Extractor Tool Kit

Feature

Must Have Tool EWK Blind Bearing Puller Set is designed for dismounting pilot bushings and bearings from housings. Remove the stubborn blind bearings with ease.
Wide Applications The various size of expandable collets and threaded adapters are perfectly suitable for removal job on tightly jammed axles, stubborn wheeling bearings, and bushings.
Energy Saver This blind hole puller is constructed for optimum strength and durability to suit a wide range of bearing bore diameters. Simply apply this tool on bicycles, motorcycles, most compact cars, mid-size cars and light pickup trucks.
Quick Removal and Reinstall The 3lb sliding hammer allows high impact forces to be applied under safety and efficiency. Also works for installation of bearings by punching it right back with slide hammer.
Best Seller on Amazon Highly recommend by professional mechanics. Qualified ISO and TUV manufacturing process. EWK provides you premium quality tools with 12 months warranty. Service and Safety guaranteed!

7. Goplus 16PCS Blind Inner Bearing Puller Hole Remover Extractor Set, Slide Hammer Tool Kit

Feature

High Hardness and ToughnessThis is Goplus bearing puller set, which has high hardness and toughness. Collets are made from chrome molybdenum steel, and rust-proof finish of tool set for long-lasting using.
Wide Range of ApplicationsWith different size and type of collets, Blind / Internal /Bearing Puller, this tool set fit a wide range of applications.
Easy to UseInsert collect, expand it to fit the hole, and attach the slide hammer assembly.
Multi PurposesIdeal for pulling jobs, against the bearing for pulling out evenly without damage the parts, and perfect for professional and DIY use.
Convenient for Storing and CarryingWith a durable storage case, you could easily and neatly collect the tools and easily bring it to anywhere you like.

8. ABN 3-Jaw Gear Puller Set 3in, 4in, and 6in Removal Tool Kit for Slide Gears, Pulley, and Flywheel

Feature

[Durable 3 Jaw Puller Set]: Use the ABN 3, 4, and 6-Inch Small Gear Puller 3 Jaw Small Engine Flywheel Puller Set to remove most shift-fitted parts with ease; 3 prong gear puller evenly distributes pulling force to protect your gears
[Damage-Free Removal]: Manual bearing pullers remove slide gears, pulleys, bearings, bushings, and flywheels without causing damage to your application
[Multi-Position Design]: Universal pulley puller tools have reversible jaws that switch from inside to outside grip in short or long reach lengths for maximum versatility; Each tool features 4 reach lengths
[Built to Last]: Forged and hardened steel provide maximum strength and longevity to the gear puller sets; Slim puller jaws allow for easy gripping and access to tight spaces while the steel center bolt and acme-thread offer smooth operation
[Works with your Tools]: Tall hex head screw fits your existing hand wrench, ratchet, or combination spanner for gear and bearing removal

9. DASBET 5pcs Blind Inner Internal Bearing Puller Slide Hammer Set

Feature

Bearing Extractor Collets With Internal Capacity From 3/8" (10mm) To 1-1/4" (32mm)
Open Clamps By Turning Handle Clockwise To Snug Against The Bearing For Pulling Out Evenly Without Damage The Parts
Bearing Extractor 1: 3/8" to 1/2" (10mm-14mm) ;Bearing Extractor 2: 9/16" to 11/16" (15mm-19mm)
Bearing Extractor 3: 5/8" to 1" (18mm-25mm) ;Bearing Extractor 4: 1" to 1-1/4" (25mm-32mm)
Form Fitted Case is included for storage and organization. Our products are 100% brand new. If you think the item you received is used, please contact us for a replacement.

10. Pilot Bearing Puller,Qiilu 3 Jaw Pullers Set Bushing Gear Extractor Wheel Bearing Puller Heavy Duty Automotive Machine Tool Kit for Car SUV

Feature

APPLICATION-Puller Set is ideal for: Automotive flywheel, Motorcycle wheel, Bicycle wheel, Pump bearing generator bearing, Machine bearing etc
SPCIAL 3 JAW-3 Jaw Gear Puller removes pilot bearings, pump bearings, brushings
HIGH QUALITY-Qiilu 3 Jaw Extractor is corrosion-Resistant Black Oxide Finish. Forged and Heat Treated Steel Jaws.
BEARING RANGE-Bearing Puller uses in removing all sleeve-type bearings from diameter 0.6" to 1-1/2" (16mm-38mm). Structure design, gently turning the small wrench can produce a strong pull force
IDEA TOOL-Three Jaw Design Applies Even Pressure Preventing Damage to Bearings. The overall use of chromium vanadium just manufacturing, high hardness, good toughness, strong and durable.

11. DAYUAN 16 pcs Blind Inner Bearing Puller Hole Remover Extractor Set Slide Hammer Tool Kit

Feature

For removal of Pilot Bushes Bearings etc. form blind housings
For both the Professional and DIY use
8-11mm,12-17mm,13-23mm,18-23mm,24-29mm,30-34mm,34-38mm,39-43mm,44-48mm,49-53mm,54-58mm
Screw adaptors: M10x1.5p,M10x1.5p,M8x1.25p, M10x1.5p,M6x1.0p
Collets are made from chrome molybdenum steel

12. 8MILEAKE Blind Inner Bearing Puller Hole Remover Extractor Set Slide Hammer Tool Kit

Feature

One Slide hammer assemble 2.5 jaws.For removal of Pilot Bushes Bearings etc. form blind housings.
Thread:M101.5p, M101.5p,M81.25p, M101.5p M61.0p.
Screw adaptors M10x1.5p, M10x1.5p/M8x1.25p, M10x1.5p/M6x1.0p
Collets sizes:8-11mm 12-17mm 13-23mm 18-23mm 24-29mm 30-34mm 34-38mm 39-43mm 44-48mm 49-53mm 54-58mm
1 x Counter stay puller

13. Bearing Puller Set, 5-Ton-Capacity Bearing Separator, Wheel Hub Axle Puller Set, Pinion Bearing Removal Tool Kit, Bearing Splitter

Feature

EASY OPERATION: Includes everything you need for efficient replacement of small and large wheel bearings on front and rear wheel hubs, pinions, and axle drive shafts on most vehicles. Includes an extra 2-jaw puller (L-leg puller) for working with gears, pulleys, and fly-wheels.
UNIVERSAL COMPATIBILITY: Includes heavy-duty, drop-forged 2 & 3 bar-type bearing splitters and 4 & 5 long hex push-puller legs so you can safely remove large or small bearings on front and rear wheel hub axle shafts without the hassle.
HEAVY-DUTY DURABILITY: Built with rugged drop-forged construction and heat-treated to withstand rigorous jobs, this bearing puller set is proven dependable for the long haul.
PROTECTIVE CARRYING CASE: Includes a custom-made ABS tool case with precision-sized slots for each component. It keeps your gear organized while extending the life of your tools.
ALL-IN-ONE TOOL KIT: Includes 14-piece bar-type gear and axle bearing separator, 4-piece 4 (10cm), 4-piece 5 (12.7cm) hex push-puller legs, 1-piece 2 (5cm) and 1-piece 3 (7.6cm) bearing separator jaws or splitters, 2-piece L-type legs, 1-piece 5 (12.7) puller crossbar with 1-piece 6-1/4 (15.9cm) forcing screw.

14. YOTOO Bearing Pullers Set 5 Ton Capacity, Bearing Separator Kit

Feature

HEAVY DUTY BEARING PULLERS: Made of rugged drop forged construction and heat treated to withstand difficult and rugged jobs, making this a bearing puller set a long lasting and reliable tool.
COMPLETE SET: YOTOO bearing separator set comes with 2"&3" bearing splitters,four sets of hex push puller legs and a 5 inch bar type puller head with forcing screw, giving the user options to deal with various pulling jobs.
VARIOUS PULLING JOBS: YOTOO pulling kit features a bar puller and legs that are perfect solutions to complete pulling jobs safely and successfully.
WIDELY USE: This bearing puller kit can be used separately or in combination with other pullers and tools, making this tool suitable for beginners or professionals
WARRANTY&SUPPORT: ONE YEAR WARRANTY. If any problems, please feel free to contact us.

15. DASBET 16PCS Blind Inner Bearing Puller Hole Remover Extractor Set Slide Hammer Tool Kit

Feature

ApplicableThis inner bearing puller set is designed for loosening and pulling tight bearings and bushings, and fit for all vehicles 8-53MM bore bearing.
Instructions to operate: How to use? Firstly insert the correct collet in the bore of the bearing and turn the nut to expand the collet till it is secure within the bearing; Attach the small slide hammer and yank the weight towards the handle to give an extra snap of weight; Repeat action until the bearing or bushing has been removed; U-shaped bearing seal puller can be used by threading the bushing puller onto the collet and tightening the nut to slowly pull the bearing out of place.
UsageThis slide bearing removal tool is designed to quickly finish the job without damaging the removed parts or the tool. This small bearing puller tool is ideal for professionals and do-it-yourselfers.
Sturdy Construction: Constructed of a strong, durable carbon steel, the bearing extractor tool is sure to pull even the toughest wheel bearing and bushings from tight positions. This blind bearing puller set has a long steel rod and a T-bar handle. The flared ends of the shop hammer weight provides a sturdy grip. The forged hardened steel and rust-proof finish help to increase pulling strength and force while also providing longevity for the tool.
Easy StorageComes in a blow molded case for safe & easy transport and storage.

16. KUNTEC 3Pc Rear Axle Bearing Puller Axle Bearing Puller Extractor Installer Repair Tool Kit

Feature

FUNCTION: This rear axle bearing set pulls semi-floating rear axle bearings quickly and effectively
COMPATIBILITY: Axle sizes this unit will work with 1" to 1-7/8", 1-5/16" to 2-3/8", or 1-3/8" to 2-7/8". Standard SAE sizes, this rear axle bearing tool works on most domestic/American vehicles.
SMALL PULLER: Fits minimum bearing tube I.D. of 1 in. and maximum axle tube I.D. of 1-7/8 in.
MEDIUM PULLER: Fits minimum bearing tube I.D. of 1-5/16 in. and maximum axle tube I.D. of 2-3/8 in.
LARGE PULLER: Fits minimum bearing tube I.D. of 1-3/8 in. and maximum axle tube I.D. of 2-7/8 in.

Conclusion

All above are our suggestions for bearing extractor set. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using bearing extractor set with us by comment in this post. Thank you!