Best arduino oled i2c for 2020

When it comes to choosing your arduino oled i2c, there are hundreds of different choices. In our review, weve considered all the various features youll need to know before buying the best arduino oled i2c. We hope that through this article, with our comparison table, in-detail review of each product can help you decide which one is your best arduino oled i2c.

Best arduino oled i2c

Related posts:

Best arduino oled i2c reviews

1. DIYmall 0.96" OLED Module 0.96 inch I2C IIC Serial 128X64 OLED Display Module SSD1306 Driver for Arduino 51 MSP420 STIM32 SCR Raspberry PI (1pc X White)

Feature

Document link: https://drive.google.com/open?id=1qkexPET5MUICAarGOtlnQk4F-JEKkrHZ
The screen is made in Taiwan, quality is much better. Compatible with MMDVMPi-Star, and it works with raspberry pi. https://tech.scargill.net/ssd1306-with-python/
The IIC address can be changed,it is convenient to use with different machines
Four square holes are easy to install, and no need a pull-up resistor on the i2c lines from an arduino uno.
What You Get: 1 X 0.96 White OLED Module. PS: How to use these two oled display modules at the same time, pls check the vedio for reference: https://www.youtube.com/watch?v=yef23sJjiU0

2. UCTRONICS 0.96 Inch OLED Module 12864 128x64 Yellow Blue SSD1306 Driver I2C Serial Self-Luminous Display Board for Arduino Raspberry Pi Pico

Feature

UCTRONICS 0.96 Inch OLED Module for showing graphical & textual information directly on your micro-controller projects. It supports many chips: Arduino UNO and Mega, Raspberry pi, 51 MCU, STIM 32, etc., the UNO shown in the picture is NOT INCLUDE
Resolution: 128 x 64, View angle: > 160, Support voltage: 3.3V-5V DC, Power consumption: 0.04W during normal operation, full screen lit 0.08W
Embedded Driver IC: SSD1306. Communication: I2C/IIC Interface, only need two I / O ports
Needn't backlight, the display unit can self-luminous. It has Super High Contrast, bright and crisp dots, even tiny fonts quite readable
No embedded fonts inside the OLED controller, user can create the fonts through the font generation software. We offer technical support and software library as well as the guide book in the package

3. MakerFocus 2pcs I2C OLED Display Module 0.91 Inch I2C SSD1306 OLED Display Module Blue I2C OLED Screen Driver DC 3.3V~5V for Arduino

Feature

Product Manual: https://drive.google.com/open?id=14A_luFwqvZaKu-PKTfJdWmUZ4T4Wk65X
OLED display, no need backlight, self-illumination, Display Color: Blue. Plz note: These I2C OLED Display Module comes without pin headers.
The display performance is better than the traditional LCD display, also lower consumption; IIC (I2C communications) simplifies connections.
Use with Arduino, ESP8266, ESP32, STM32, etc; 3.35v Power; Operating temperature:-40 - 85 ; Resolution: 128 x 32.
We a Strong After-sales Service Team: As long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click MakerFocus and click Ask a question to email us! Looking forward to your consultation!

4. IZOKEE 0.96'' I2C IIC 12864 128X64 Pixel OLED LCD Display Shield Board Module SSD1306 Chip 4 Pin for Arduino for Raspberry Pi (Pack of 3pcs, Yellow-Blue-IIC)

Feature

0.96" SSD1306 128X64 OLED LCD Display with IIC/I2C Interface-4PIN.
Due to the high resolution of 128 x 64 pixels, the display offers a lot of space to display elements!
Easy connection of the display with Arduino, Raspberry Pi, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc.. Only through I2C interface via four pins!
The IIC address can be changed. Thanks to the standard driver chip (SSD 1306) libraries already exist for Arduino, Raspberry Pi and 51 Series, which makes programming very easy!
Tip: The blue and yellow areas are fixed and cannot be reset. The yellow area is the upper row, and the lower area is blue, as shown in the picture.

5. DSD TECH 2 PCS IIC OLED Display 0.91 Inch for Arduino ARM

Feature

0.91 INCH OLED Display: Resolution is 128*32,Very Clear,Black background with blue text display.
IIC(I2C) interface: Only 4 PIN( VCC, GND, SCL, SDA), Simpler than SPI interface Screen, you can leave more ports for connecting other sensors.
Sample Code and Technical Support: You can drive this display through the u8glib library. DSD TECH also provides complete sample code and instruction manuals. you can drive this OLED screen in half an hour,
The main chip is SSD1306; supports DC 3.3V to 5.0V supply. Working Temperature: -30 degrees ~ 70 degrees
About Warranty: DSD TECH offers 1 year warranty and lifetime technical support.If you meet any question, Please contact us, we will fix your issue within 24 hours.

6. PEMENOL 5PCS OLED Display Module 0.96 InchI2C IIC Serial 128 x 64 OLED LCD Display Module with SSD1306 Driver for Arduino Raspberry Pi and Microcontroller - White Light

Feature

CHANGEABLE IIC ADDRESS: The built-in standard driver chip SSD 1306 already exists in the libraries of Arduino, Raspberry Pi and 51 Series,which makes programming very easy. This oled display can be used with different machine easily.
128 X 64 PIXELS: With high resolution of 128 x 64 pixels, no need backlight, self-illumination, pixels stand outvery well even in a brighter circumstances like full sunlight.
COMPATIBLE WITH MANY CONTROL CHIPS: This oled display can be widely use with 51 series, MSP430 series, STM32/2, CSR IC, etc. 4PCS male pins makes the lightweight connecting easily.
WIDE FIELD OF CLEAR VIEW: 0.96inch OLED display module supports 180 degrees of view from up to down and right and left, which is convenient for you to clearly observe the information displayed from different angle.
EASY TO INSTALL: With four square holes, our I2C OLED display module can be installed easily, truly convenient to use and simple you working.

7. MakerHawk I2C OLED Display Module 1.5 Inch OLED Module Arduino LCD Display SSD1327 Driver Chip, 128x128 Pixels, 16-bit Grey Level with I2C Interface, DC 3.3V/ 5V for Arduino

Feature

Manual and data download link: https://drive.google.com/open?id=19LAGdkv_pw9T9SwnTg2OKHPPKeMfytcb. You can try use the library "U8G2" - Do NOT try to use the older superseded U8G Library - it simply does not include the needed setup info for this module. When using the U8G2 library, use the following Constructor line in your sketch: U8G2_SSD1327_EA_W128128_1_HW_I2C u8g2(U8G2_R0, /* reset=*/ U8X8_PIN_NONE);
1.5" IIC OLED MODULEOLED: 1. for any platform which has the IIC interface; 2. 128*128 dots included in the OLED screen; 3. 256 level contrast can be set; 4. On board level conversion chip for 5V/3.3V MCU.
SSD1327 Driver Chip: SSD1327 is a single-chip CMOS OLED/PLED driver with controller for organic/polymer light emitting diode dot-matrix graphic display system. It consists of 128 segments and 128 commons. This IC is designed for Common Cathode type OLED/PLED panel.
High resolution: 128128; Viewing angle: greater than 160; Operating voltage: 3.3V / 5V; Module size: 45.5x34.3 (mm). Supports for 16-bit grey level display which makes the sense of depth of the picture more stronger and more realistic.
Driver chip: SSD1327; Module interface: I2C; Display color: white; Gray scale: 16 bits; On board level conversion chip for 5V/3.3V MCU; 256 level contrast can be set; commonly used IIC interface.

8. 2pcs 0.96 Inch OLED Display Module IIC I2C SSD1306 Compatible with Arduino Driver DC 3-5V (White)

Feature

0.96 inch OLED with White/Blue/Yellow&Blue color,128x64 resolution. The driver IC is SSD1306 with I2C interface.
It is OLED display without backlight and it is low power dissipation .The thickness of galss is only 1.4mm.
It is highlight.It is full viewing angle and wide operating temperature .Supported voltage: 3V-5V DC
We have the datasheet of display.It is specification,driver IC,driver code and connection of the hardware.We also have the technical support.
The default value of IIC address is 0x3c.

9. 4pcs I2C OLED 0.96 Inch OLED Display Module IIC SSD1306 128 64 LCD White with Du-pont Wire 40-Pin Female to Female for Arduino UNO R3 STM

Feature

Document link: https://drive.google.com/open?id=1qkexPET5MUICAarGOtlnQk4F-JEKkrHZ; New version: GND pins are arranged in the first place instead of VCC, and the pins are already soldered and do not need to be soldered by yourself! High quality, low price, 40pcs dupon wires are free.
I2c IIC Serial Oled LCD LED Blue Display Module: Interface: VCC: 3.3-5V; GND: Ground; SCL: Serial Clock; SDA: Serial Data; viewing angle: greater than 160 degrees; Working temperature: -30-80 degrees.
It is OLED display without backlight and it is low power dissipation.The thickness of galss is only 1.4mm. Color: White; Resolution: 128*64; Volume: 27 MM * 27 MM * 4.1 MM.
The IIC address can be changed, it is convenient to use with different machines. Driver IC: SSD1306; Supported platforms: for arduino, 51 series, MSP430 series, STIM32 / 2, SCR chips.
40pcs Du-pont Wires: 20cm/7.87 inch, 2.54mm 1p-1p pin head. The male ends meant for insertion into standard 0.1"(2.54mm) female sockets and the female ends are meant for insertion into standard 0.1"(2.54mm) male headers. They can be used for PCB project, pc motherboard.

10. GeeekPi 5PCS 0.96 Inch OLED Module 12864 128x64 White SSD1306 Driver IIC Serial Display Board Module for Arduino, Raspberry Pi,Beagle Bone Black

Feature

COMPATIBLE WITH MANY CONTROL CHIPS: Raspberry Pi 4B/3B+/3B/2B/Zero, Beagle Bone Black,Arduino UNO and Mega, 51 MCU, STIM 32 and so on. Showing graphical & textual information directly on your micro-controller projects.
PARAMETER:Resolution: 128 x 64, View angle: > 160, Support voltage: 3.3V-5V DC, Power consumption: 0.04W during normal operation, full screen lit 0.08W,Color:White.
CHANGEABLE IIC ADDRESS:The IIC address can be changed,it is convenient to use with different machines Four square holes are easy to install.
128 X 64 PIXELS:Needn't backlight, the display unit can self-luminous. It has Super High Contrast, bright and crisp dots, even tiny fonts quite readable.No embedded fonts inside the OLED controller, user can create the fonts through the font generation software.
Wiki:https://wiki.52pi.com/index.php/0.96_Inch_OLED_Module_SKU:_S-0005 ; https://youtu.be/T1N9XyRC1GQ

Conclusion

By our suggestions above, we hope that you can found the best arduino oled i2c for you. Please don't forget to share your experience by comment in this post. Thank you!