Top 10 arduino nano mp3 for 2024

Shopping for the best arduino nano mp3 is about as tricky as finding your soulmate. You not only think about quality, price but also need to find where to buy arduino nano mp3. Don’t worry any more! We spend many hours to review and compare arduino nano mp3 to make the short list for you. Let’s check which product is suitable with you.

Best arduino nano mp3

Related posts:

Best arduino nano mp3 reviews

1. ELEGOO Nano Board CH 340/ATmega+328P Without USB Cable, Compatible with Arduino Nano V3.0 (Nano x 3 Without Cable)

Feature

You could download the driver of Elegoo Nano V3.0 at: http://bit.ly/2jKlJMO
The Nano is using the chips ATmega328P and CH340, not FT232 as official Arduino, so pls. use the driver from above link.
It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper.
Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other).
The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.

2. Nano V3.0, Nano Board ATmega328P 5V 16M Micro-Controller Board Compatible with Arduino IDE (Nano x 3 with USB Cable)

Feature

Original ATmega328P CH340 chip is used. Improved new version CH340G Replace FT232RL.
LAFVIN Nano V3.0 card is 100% compatible with the Nano card, and fully compatible with Windows, Mac and Linux operating system.
Works the same as original Nano, runs perfectly on programming software.
Using Atmel Atmega328P-AU MCU, Support ISP download; Support USB download and Power.
LAFVIN Nano CH340 controller is a compact board similar to the R3 board, smaller and breadboard-friendly than Diecimila.

3. Amazon Basics USB 2.0 Charger Cable - A-Male to Mini-B Cord - 3 Feet (0.9 Meters)

Feature

3-foot-long high-speed USB 2.0 A-Male to Mini-B cable
Connects speed-critical devices, such as external hard drives and smart phones, and peripherals that require a Mini-B connection to your computer
Constructed with corrosion-resistant, gold-plated connectors for optimal signal clarity and shielding to minimize interference
Distributed by Amazon; backed by one-year Amazon Basics warranty
Backwards compatible with USB 1.0

4. PEMENOL Voice Playback Module Music Player Voice prompts Voice Broadcast Device MP3 Trigger Amplifier Class D 5W 64MBit Flash for Arduino

Feature

Support MP3 and WAV Decoding Format: onboard 64Mbit (8M bytes) Flash storage, can be connected to a computer via a USB cable to update Flash storage audio files
UART Serial Port Control Voice Broadcast Function: With control playback, pause, song selection, volume addition and subtraction functions. Up to 65535 tracks can be selected, and the baud rate is 9600 bit/s
24-bit DAC output, dynamic range supports 90dB, signal-to-noise ratio supports 85dB
Support 64Bbit(8Mbyte) Flash memory, no memory card required
Built in 5W Class D amplifier circuit and can directly drive 4ohm 3~5W speaker. for more details, please read the user manual.(Control + F to search it)

5. HiLetgo TF Card U Disk Play MP3 Decoder Player Module with Audio Amplifier Audio Decoding Player Module Micro USB 5V Power Supply

Feature

With high quality, onboard 2W single channel power amplifier.
Convenient to wire and refit; 4 buttons on the board for setting operation.
Support MP3 format, playing power on automatically, LED indocator light when module is working.
Mp3 lossless decoders power amplifier Mp3 player module Mp3 decoder board support TF card and USB.
Support TF Card (mobile phone memory card), U disk playback mode With the speaker terminals without welding.

6. ELEGOO UNO R3 Board ATmega328P with USB Cable(Arduino-Compatible) for Arduino

Feature

Clear prints on the female header connector, more precise and easier to use the wire.
The ELEGOO UNO R3 BOARD now uses an 16U2 instead of the ATMega8U2 chip. Faster transfer rates and more memory.
Control using ATMEL ATMEGA+328P chip(the same with Arduino UNO R3)
100% compatible with the Arduino IDE and RoHS Compliant
We have always cared about the customer experience and improve the product function details.

7. 1.28inch Round LCD IPS Display Module 240240 Resolution 65K RGB Colors GC9A01 Driver SPI Interface for Arduino/Raspberry Pi/Jetson Nano/STM32

Feature

240240 resolution, 65K RGB colors, clear and colorful displaying effect
SPI interface, minimizes required IO pins, supports controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32
OPERATING VOLTAGE:3.3V / 5V
DISPLAY PANEL: IPS. PIXEL SIZE: 0.135 0.135mm; DRIVER: GC9A01

8. Antrader 1-Feet Mini USB 2.0 Cable A-Male to Mini-B 30cm Length Pack of 6

Feature

1-foot-long high-speed USB 2.0 A-Male to Mini-B cable, Pack of 6.
Connect your 5-pin mini-USB camera or device to the USB port on your USB hub, PC or Mac.
Just plug-and-play for many digital camera models, GPS, cellphones, MP3 players, PDAs and other mini-USB devices.
Constructed with corrosion-resistant, gold-plated connectors for optimal signal clarity and shielding to minimize interference.
The purchase of 20-wire power cords exceeds industry standards (based on the power cord diameter standard required for USB-IF certification), which can improve power handling.

9. HiLetgo 3pcs Nano V3.0 3.0 Controller Terminal Adapter Expansion Board Nano IO Shield Simple Extension Plate for Arduino Mano AVR ATMEGA328P

Feature

NANO IO Shield for Arduino

10. ALAMSCN Mini MP3 Player Module Dfplayer Audio Music Modules Voice Decode Board TF Card U Disk IO/Serial Port/AD Board with 2W 8Ohm Speaker Round for Arduino DIY (3pcs MP3 Player + 6pcs Speaker)

Feature

Small and low cost MP3 module, with an simplified output directly to the speaker. The module can be used as a stand alone module with attached battery, speaker and push buttons or used in combination with an Arduino UNO or any other with RX/TX capabilities.
Perfectly integrates hard decoding module, which supports common audio formats such as MP3, WAV and WMA. Besides, it also supports TF card with FAT16, FAT32 file system. Through a simple serial port, you can play the designated music without any other tedious underlying operations.
Optional control modes, I/O control mode, serial mode, AD button control mode.
Come with 2W 8Ohm 40mm Speakers, high sensitivity, loud voice, good and clear sound quality.
Note: All music files must be placed in / mp3 folder; the music file name must use 4 words, such as 0001.mp3, 0002.mp3 ..... 0255.mp3.

Conclusion

All above are our suggestions for arduino nano mp3. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using arduino nano mp3 with us by comment in this post. Thank you!